Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Double-clad erbium/ytterbium-doped fiber laser with a fiber Bragg grating

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating.

Tunable, Gain-Clamped Double-Pass Erbium-Doped Fiber Amplifier with A Dbr Lasing Cavity Including A Fiber Bragg Grating and A Fiber Reflection Mirror

Dual-wavelength high-power Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating

High-Power Multi-Wavelength Double-Clad Erbium Ytterbium Co-Doped Fiber Laser Using Two-and Four-Mode Fiber Filters

High power mode-locked erbium–ytterbium doped fiber laser using GIMF–SIMF–GIMF fiber structure as saturable absorber

Efficient DBR Single-Frequency Er3+/Yb3+ Co-Doped Phosphate Fiber Laser Operating at 1500 Nm

Optimal design of Er/Yb co-doped fiber amplifiers with an Yb-band fiber Bragg grating

Single-frequency Fiber Laser from Linear Cavity with Loop Mirror Filter and Dual-Cascaded FBGs

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Tunable, gain clamped double pass Erbium doped fiber

Tunable Gain-Clamped Double-Pass Erbium-doped Fiber Amplifier.

Tunable erbium-doped-fiber laser based on the Double-Superimposed Fiber Bragg Gratings

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Highly efficient dual-wavelength ytterbium-doped fiber linear cavity laser based on cascaded fiber Bragg gratings

Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point technique

Tunable Fiber Laser Using an Er/Yb Codoped Fiber Based Modal Interferometer Filter

High-Efficiency Hybrid Brillouin/Ytterbium Fiber Laser

High-efficiency continuous-wave Tm-doped fiber laser with a single fiber Bragg grating at 1942 nm

LD-Pumped Random Fiber Laser Based on Erbium-Ytterbium Co-Doped Fiber

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription