Abstract:Monolithic distributed Bragg reflector (DBR) cavity which directly integrates fiber Bragg gratings (FBGs) into the photosensitive RE-doped fibers is a promising configuration in constructing compact and efficient single frequency fiber lasers (SFFLs). Yet, the doping level of rare-earth (RE) ions has generally to be sacrificed in the classical Ge-photosensitized RE-doped silica fibers because of the dramatic refractive index increase caused by the introduction of Ge. Here, we demonstrate an approach to realize the trade-off between photosensitivity and RE doping concentration. We validate that the addition of a small amount of cerium (0.37wt.%) instead of Ge could photosensitize Yb3+-doped silica fiber (YDF), while maintaining fiber numerical aperture (NA) at 0.12 under a high 2.5-wt.% Yb doping level. Based on the short monolithic DBR cavity constructed by this germanium-free photosensitive highly YDF, a 1064 nm fiber laser with a 48.6% slope efficiency and an over 200 mW power on two orthogonally polarized modes could be realized. Further stable and linear-polarized 1064 nm SFFL is also demonstrated in a designed monolithic polarization maintaining cavity with an output power of 119 mW and an efficiency of 26.4%. Our results provide an alternative way to develop photosensitive highly RE-doped fibers towards monolithic laser cavity application.

High temperature resistant ultra-short DBR Yb-doped fiber laser

Ultra-short DBR Fiber Laser with High-Temperature Resistance Using Tilted Fiber Bragg Grating Output Coupler.

Type IIa Bragg grating based ultra-short DBR fiber laser with high temperature resistance

High-temperature-resistant distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber

High Temperature Resistant Fiber Bragg Grating Lasers for Sensing Applications

Ultra-high-temperature Resistant Distributed Bragg Reflector Fiber Laser Based on Type II-IR Fiber Bragg Gratings.

Distributed Bragg Reflector Fiber Lasers for High Temperature Sensor Applications

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance

Fabrication of Integrated Single Frequency DBR Fiber Laser Directly on YDF by Femtosecond Laser

DBR Yb-doped Double-Clad Fiber Laser Operating at 1.06 Μm

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Tunable Single-Frequency Ytterbium-Doped Fiber BDR Laser

High-temperature linearly polarized single-frequency fiber lasers based on non-PMFBGs preparation through femtosecond laser

High-temperature Linearly Polarized Single-Frequency Fiber Lasers Based on a Non-Polarization-maintaining FBG Preparation Through a Femtosecond Laser

Yb 3+ -Doped Double-Clad Fibre Laser Based on Fibre Bragg Grating

Yb 3+ -Doped Double-Clad Fiber Laser with All Fiber Cavity

Low-threshold 1150 Nm Single-Polarization Single-Frequency Yb-doped DFB Fiber Laser

Single-frequency DBR lasing by integrating FBGs into germanium-free photosensitive highly Yb3+-doped silica fibers

Short-Wavelength, In-Band-pumped Single- Frequency DBR Tm3+-Doped Germanate Fiber Laser at 1.7 Μm

Characteristics of DBR Fibre Lasers