Abstract:The sapphire fiber Bragg grating (SFBG) is a promising high-temperature sensor for application in aviation and power industries; however, the multimode characteristics of SFBG result in a broadband reflection envelope, including multiple peaks, which have a strong impact on the sensing accuracy. In this article, we propose and experimentally demonstrate a cross correlation algorithm (CCA) for the demodulation of SFBG, with the benefit of enhancing the stability of wavelength detection, and hence, the sensing accuracy can be improved. The SFBG high-temperature sensor was created by using the femtosecond laser line-by-line method and sealed in an argon gas-infiltrated sapphire tube. Such a device was demodulated by using the CCA, and the findings show that the Bragg wavelength dispersion of ±12 pm could be obtained; furthermore, before the calibration process, the SFBG sensor was annealed at 1500 °C for 50 h to enhance the stability of reflection spectrum. The temperature calibration experiment has been carried out. In that case, a dry-block calibrator with high stability was employed to calibrate the temperature uncertainty of SFBG is ±0.7 °C. Compared to the calibrated thermometer, the maximum difference is less than 2 °C. In that case, a tube furnace was used to test the SFBG; the temperature uncertainty increased to 2.2 °C, and the maximum difference increased to 7 °C. This is due to the larger temperature fluctuation of this tube furnace. A 1000-h (i.e., 42 days), 1500 °C stability test was carried out. The SFBG exhibited excellent long-term high thermal stability (temperature deviation less than 2.0 °C). A cycling temperatures test was performed, which exhibited good repeatability in temperature measurements. Hence, such an SFBG sensor and the demodulation algorithm are prospectives for applications in harsh environments.

SLM Fiber Laser Stabilized at High Temperature

Ultrafast Annealing Improves SNR and Long-Term Stability of a Highly Multiplexed Line-by-Line FBG Array Inscribed by Femtosecond Laser in a Coreless Fiber for Extreme-Temperature Applications

Femtosecond Laser Inscribed Sapphire Fiber Bragg Grating for High Temperature and Strain Sensing

Bragg grating tuned fiber laser system for measurement of wider range temperature and strain

Parallel-Integrated Sapphire Fiber Bragg Gratings Probe Sensor for High Temperature Sensing

A Broad Continuous Temperature Tunable DBR Single-Frequency Fiber Laser at 1064 nm

High-temperature-resistant distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber

Temperature Stability of High Ge-doped Fibre Bragg Grating

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing Devices

Stabilized Ultra-High-Temperature Sensors Based on Inert Gas-Sealed Sapphire Fiber Bragg Gratings

High temperature resistant ultra-short DBR Yb-doped fiber laser

Temperature Stability and Spectral Tuning of Long Period Fiber Gratings Fabricated by Femtosecond Laser Direct Writing

High-temperature sustainability of strong fiber Bragg gratings written into Sb-Ge-codoped photosensitive fiber: decay mechanisms involved during annealing.

Inscription and characterization of Bragg gratings in single-crystal sapphire optical fibres for high-temperature sensor applications

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Sapphire Fiber Bragg Gratings Demodulated With Cross Correlation Algorithm for Long-Term High-Temperature Measurement

Femtosecond Laser-Inscribed High-Order Bragg Gratings in Large-Diameter Sapphire Fibers for High-Temperature and Strain Sensing

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation