Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Novel Method for Fabricating Adjustable Apodized and Chirped Gratings by UV Light Scanning Writting Technology

Technological Processes of Grating Light Valve As Diffractive Spatial Light Modulator in Laser Phototypesetting System

Refined Spectral Regulation of Chirped Fiber Bragg Gratings

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

A novel method for fabricating apodized fiber Bragg gratings

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Acousto-optic modulation of fiber grating

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Femtosecond Laser Plane-By-Plane Inscription of Chirped and Tilted Fiber Bragg Gratings

Long Period Fiber Gratings Inscribed With an Improved Two-Dimensional Scanning Technique

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond laser fabrication of long period fiber gratings by a transversal-scanning inscription method and the research of its orientational bending characteristics

Induced Bragg Gratings in Optical Fibers and Waveguides Using an Ultrafast Infrared Laser and a Phase Mask

Custom design of large chirped fiber Bragg gratings on application of arbitrary profile filtering

Method for Fabricating Large-Area Gratings with a Uniform Duty Cycle Without a Spatial Beam Modulator

Point-by-point written fiber-Bragg gratings and their application in complex grating designs

Fabrication of high quality chirped fiber Bragg grating by establishing strain gradient

Theory and Experiment on Linear Chirped Fiber Bragg Grating with Amplitude and Phase Samplings

A Novel High-Sensitivity Chirp Tuning Device of Fiber Grating