Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

A novel method for fabricating apodized fiber Bragg gratings

Novel Method for Fabricating Adjustable Apodized and Chirped Gratings by UV Light Scanning Writting Technology

A Method of the Synthesis of Fiber Bragg Grating Array without Any Damage

Novel sampled grating apodization technique

A novel apodization technique of variable duty cycle for sampled grating

Drawing-tower Inscription of Apodized Fiber Bragg Grating Arrays Using a Rotated Focusing Cylindrical Lens

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Method for Fabricating Large-Area Gratings with a Uniform Duty Cycle Without a Spatial Beam Modulator

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

Femtosecond laser line-by-line inscription of apodized fiber Bragg gratings

A novel method for inverse fiber Bragg grating structure design

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Research and Optimization of FBG Apodization Technic Based on Double-exposure Method

Method for preparing bragg grating by femtosecond laser and apparatus

Fabrication of Low-Stray-Light Gratings by Broad-Beam Scanning Exposure in the Direction Perpendicular to the Grating Grooves

Femtosecond laser inscribed fiber Bragg gratings based on precise spatial apodization

Refined Spectral Regulation of Chirped Fiber Bragg Gratings

Fabrication of microfiber-based Bragg gratings with ultraviolet-light exposure

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Study on Fabrication Methods of Fiber Gratings