Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Grating Inscription Into Fluoride Fibers: A Review

Femtosecond pulse written fiber gratings: a new avenue to integrated fiber technology

Femtosecond Laser Inscription of FBGs in Ytterbium-Doped Fiber Based on Fluorescence Detection Techniques

Development Of Fiber Gratings Inscribed By Femtosecond Laser

Femtosecond-written long-period gratings in fluoride fibers

First-order fiber Bragg grating inscription in indium fluoride fiber using a UV/Vis femtosecond laser and two-beam interferometry

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

Femtosecond inscription of phase-shifted gratings by overlaid fiber Bragg gratings

Inscribing Long Period Fiber Gratings (lpfgs) with Infrared Ultra-short Laser Pulses

Application of Fiber Lasers Based on Femtosecond Laser Inscribed Fiber Bragg Gratings

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Fiber Bragg Gratings in the Visible Spectral Range With Ultraviolet Femtosecond Laser Inscription

Advances on Polymer Optical Fiber Gratings Using a KrF Pulsed Laser System Operating at 248 Nm

Fibre Bragg Gratings Fabrication in Four Core Fibres

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond laser direct-writing of high quality first-order Bragg gratings with arbitrary complex apodization by phase modulation