Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Experimental Study of Fiber Bragg Grating for different Period by using Phase Mask Technique.

Nanoscale morphology and thermal properties of low insertion loss fiber Bragg gratings produced using the phase mask technique and a single femtosecond laser pulse

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Femtosecond inscription of semi-aperiodic multi-notch fiber Bragg gratings using a phase mask

Wavelength Trimming Technique During the Fabrication of Fiber Bragg Gratings by Phase Mask Approach

Femtosecond inscription of chirped fiber Bragg gratings and fiber Bragg grating arrays using a single uniform phase-mask

Femtosecond Inscription of a Fiber Bragg Grating Spectral Array in the Same Spatial Location

Femtosecond inscription of phase-shifted fiber Bragg gratings using defocusing and phase-mask movement

NUMERICAL ANALYSIS OF FORMING UNIFORM FIBER BRAGG GRATINGS, USING PHASE MASK

Femtosecond inscription of a spectral array of four fiber Bragg gratings at the same spot, using a single uniform phase-mask

Induced Bragg Gratings in Optical Fibers and Waveguides Using an Ultrafast Infrared Laser and a Phase Mask

Enhanced Bragg Resonances in Small Period Long Period Fiber Grating Fabricated with Femtosecond Laser Line by Line Technique

Single-core multi-channel moiré fiber grating and multi-wavelength LMA fiber grating fabricated based on two-dimensional spatially encoded phase mask

Micromachining & FBG fabrication using point by point technique utilizing femto-second laser

Ultra-fast fiber Bragg grating inscription in CYTOP polymer optical fibers using phase mask and 400 nm femtosecond laser

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

Femtosecond laser writing of fiber Bragg gratings using the phase mask technique: a geometrical optics analysis based on the Bravais refractive index

Reflection Spectrum Characteristics of Bragg Fiber Bragg Grating

Fabrication and Sensing Application of Phase Shifted Bragg Grating Sensors

Refined Spectral Regulation of Chirped Fiber Bragg Gratings

Femtosecond inscription of phase-shifted gratings by overlaid fiber Bragg gratings