Abstract:In the last decade, tilted fiber Bragg gratings (TFBGs) have received a lot of research attention due to their unique ability for detection of bending and surrounding refractive index (SRI). Meanwhile, fabrication of TFBGs normally requires fiber pre-hydrogenation and expensive laser systems, such as excimer laser at 193 nm or femtosecond lasers. In this work, we report the first TFBG inscriptions in Boron co-doping fibers (PS1250/1500, FIBERCORE) using low cost 266 nm solid state pulsed laser and scanning phase mask lithography technique. By using this inscription set-up, gratings with tilt angles from 2° to 10° are fabricated. Influences (pulse repetition rate and scanning speed) on the grating quality and spectral performances are discussed. Furthermore, evolution of spectra during the inscription of the 10° TFBG is illustrated showing uniform growths of both the core and cladding modes. In addition to the TFBG fabrication, temperature, bending and SRI measurement are conducted. Because the core mode is restricted to propagate in the fiber core, TFBGs could automatically provide temperature compensation. The ease of TFBG fabrication and the capability of intrinsic temperature self-compensation pave the way to their potentially promising applications in curvature and refractometric measurement.

Femtosecond inscription of phase-shifted fiber Bragg gratings using defocusing and phase-mask movement

Femtosecond inscription of a spectral array of four fiber Bragg gratings at the same spot, using a single uniform phase-mask

Femtosecond inscription of chirped fiber Bragg gratings and fiber Bragg grating arrays using a single uniform phase-mask

Femtosecond Inscription of a Fiber Bragg Grating Spectral Array in the Same Spatial Location

Femtosecond inscription of phase-shifted gratings by overlaid fiber Bragg gratings

Femtosecond-pulse inscription of fiber Bragg gratings with single or multiple phase-shifts in the structure

Phase-shifted Gratings Fabricated with Femtosecond Laser by Overlapped Two Types of Fiber Bragg Gratings

Femtosecond inscription of semi-aperiodic multi-notch fiber Bragg gratings using a phase mask

Fabrication of Phase-Shifted Fiber Bragg Grating by Femtosecond Laser Shield Method

Point-by-point inscription of apodized fiber Bragg gratings

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Femtosecond laser direct-writing of high quality first-order Bragg gratings with arbitrary complex apodization by phase modulation

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Ultra-fast fiber Bragg grating inscription in CYTOP polymer optical fibers using phase mask and 400 nm femtosecond laser

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Femtosecond Laser Line-by-line Tilted Bragg Grating Inscription in Single-Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber

Tunable Direct Writing of FBGs into a Non-Photosensitive Tm-Doped Fiber Core with an Fs Laser and Phase Mask

Femtosecond laser inscribed fiber Bragg gratings based on precise spatial apodization