Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Micromachining & FBG fabrication using point by point technique utilizing femto-second laser

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Miniature Fabry-Perot Cavity Based on Fiber Bragg Gratings Fabricated by Fs Laser Micromachining Technique

Fiber bragg gratings fabricated by femtosecond laser micromachining methods

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Point-by-Point Femtosecond-Laser Inscription of 2- Μ M-Wavelength-band FBG Through Fiber Coating

Parallel-Integrated Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Femtosecond Laser Direct Written Fiber Bragg Gratings with Narrow Bandwidth and High Sideband Suppression

Application of Fiber Lasers Based on Femtosecond Laser Inscribed Fiber Bragg Gratings

Fabricating Phase-Shifted Fiber Bragg Grating by Simple Postprocessing Using Femtosecond Laser

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Fbg Inscription In Multimode Microfiber Via Point-By-Point Radiation With Femtosecond Laser

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

High flexibility FBG inscribing by point-by-point method via femtosecond laser: Technology, progress, and challenges

High-quality fiber Bragg grating inscribed in ZBLAN fiber using femtosecond laser point-by-point technology.

Capillary Fiber Bragg Grating Fabricated by Femtosecond Laser for Sensing Applications

Multi-wavelength FBG Based on Thermal Diffusion and Phase Mask Techniques

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss