Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Application of Fiber Lasers Based on Femtosecond Laser Inscribed Fiber Bragg Gratings

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Femtosecond pulse written fiber gratings: a new avenue to integrated fiber technology

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

High flexibility FBG inscribing by point-by-point method via femtosecond laser: Technology, progress, and challenges

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Micromachining & FBG fabrication using point by point technique utilizing femto-second laser

Miniature Fabry-Perot Cavity Based on Fiber Bragg Gratings Fabricated by Fs Laser Micromachining Technique

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Optical Microfiber-Based Ultrafast Fiber Lasers

Parallel-Integrated Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Grating Inscription Into Fluoride Fibers: A Review

High-Efficiency Inscription of Fiber Bragg Grating Array with High-Energy Nanosecond-Pulsed Laser Talbot Interferometer

All-in-Fiber Fabrication of Cladding Devices and Components Using Femtosecond Laser Pulses

Review of femtosecond laser machining technologies for optical fiber microstructures fabrication

Multiple Cladding Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators