Abstract:Double-coil inductive displacement transducer is a noncontact-type high-precision displacement measurement element, which is widely used in industrial manufacturing and large power equipment systems. Since the inductive displacement transducer has a parasitic capacitance, the frequency of the excitation signal has a great influence on the performance that has been little studied so far. In this article, the method of determining the optimal excitation frequency of double-coil inductive displacement transducer is studied. The working principle and characteristics were analyzed, a signal conditioning circuit was proposed, and a circuit simulation model was established. According to the simulation results, the influence law of the frequency of excitation signal on the double-coil inductive displacement transducer is obtained. The effect of frequency on the displacement transducer was analyzed in five aspects: frequency characteristics, output signal, sensitivity, the residual voltage at zero, and linearity. Finally, the effectiveness of the simulation results was verified through experiments. The simulation and experiment show that the proposed signal conditioning circuit can realize the demodulation of the double-coil inductive displacement transducer signal. Taking DIPT14 displacement transducer as the research object, the frequency of excitation signal has influence on the sensitivity, residual voltage at zero, and linearity. When the frequency is low, the parasitic parameters have little effect on the performance of the transducer and can be ignored. However, when the frequency is high, the parasitic parameter has a great influence on the performance of the transducer. The method presented in this article is of great significance for the study of the characteristics, signal conditioning circuit, and the determination of the optimal frequency of the excitation source of double-coil inductive displacement transducers.

Research on Sensitivity of Axial Inductive Displacement Sensors with Constant Flux for Magnetic Bearings

A novel approach for sensitivity improvement of axial inductive displacement sensor

Analysis and design of axial inductive displacement sensor

Research on New Displacement Sensor Used in Active Magnetic Bearing Systems

Research on Flux Observers in Active Magnetic Bearings

Research on transverse flux radial displacement sensor

A Displacement Sensing Method Based on Permanent Magnet and Magnetic Flux Measurement

Power Amplifier for Active Magnetic Bearings Based on Flux Observer

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Force Gain of a Flux Control Power Amplifier for Active Magnetic Bearings

The Precise Modeling and Analysis of Demodulation Approach in Self-sensing Active Magnetic Bearings

An Inductive Sensor for the Angular Displacement Measurement of Large and Hollow Rotary Machinery

Analysis and Compensation of Hysteresis Effect on Electromagnetic Force in Axial Magnetic Bearings

Dynamic Stiffness Analysis and Experimental Verification of Axial Magnetic Bearing Based on Air Gap Flux Variation in Magnetically Suspended Molecular Pump

Dynamic Force Calculation and Experimental Verification of Axial Bearings

Improving Sensitivity and Resolution of Planar Magnetic Inductive Sensors by Optimizing Gap Between Magnetic Films

Displacement sensing using bi-modal resonance in over-coupled inductors

Displacement Estimation of Self-Sensing Magnetic Bearings Based on Biorthogonal Spline Wavelet

Coupling Interference between Eddy Current Sensors for the Radial Displacement Measurement of a Cylindrical Target

Flux Density Measurement of Radial Magnetic Bearing with a Rotating Rotor Based on Fiber Bragg Grating-Giant Magnetostrictive Material Sensors.

The Effect of Frequency on Double-Coil Inductive Displacement Transducer