Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Research on transverse flux radial displacement sensor

Research on New Displacement Sensor Used in Active Magnetic Bearing Systems

Study of Differential Magnet-moving Type Velocity Sensor

Design and optimization of a new type of contactless radial C4D sensor

A Novel Eddy Current Sensor for Displacement Measurement with High Accuracy and Long Range

Analysis and design of axial inductive displacement sensor

Research on the Feasibility of Eddy Current Displacement Sensor with Temperature Variation for Non-Ferromagnetic Detection Material

Research on Sensitivity of Axial Inductive Displacement Sensors with Constant Flux for Magnetic Bearings

Research on Flux Observers in Active Magnetic Bearings

Rotor Position Detection Based on Magnetically Coupled Resonant Principle and Its Implementation

High-precision micro-displacement sensor based on tunnel magneto-resistance effect

A Displacement Sensing Method Based on Permanent Magnet and Magnetic Flux Measurement

A novel approach for sensitivity improvement of axial inductive displacement sensor

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

An Absolute Linear Displacement Sensor Based on Orthogonal Dual Traveling Wave Magnetic Field

Flux Density Measurement of Radial Magnetic Bearing with a Rotating Rotor Based on Fiber Bragg Grating-Giant Magnetostrictive Material Sensors.

Design and analysis of an eddy current displacement sensor with extended linear range

Design of ultrastable and high resolution eddy-current displacement sensor system

Coupling Interference between Eddy Current Sensors for the Radial Displacement Measurement of a Cylindrical Target

New Displacement Sensor by the Principle of Fringe-Field Capacitance

Modelling and Characteristic Analysis of A Displacement Sensor with Liftoff Compensation