Abstract:A magnetic field measurement with enhanced sensitivity based on the Vernier effect of a dual-loop optoelectronic oscillator (OEO) using a cascaded giant magnetostrictive material-fiber Bragg grating (GMM-FBG) and Monel-400-fiber Bragg grating (Monel-400-FBG) is proposed and experimentally demonstrated. The OEO loop incorporates two reflected signals from the dual FBGs, serving as separate light sources injected into two paths with distinct fiber lengths. The dispersion introduced in the loop allows the wavelength shift of the GMM-FBG to be translated into a frequency shift of the microwave signal within the OEO cavity. As the GMM-FBG's central wavelength shifts with the magnetic field variation, the change of the monitoring OEO frequency enables precise measurement of magnetic field information. Diverging from conventional single-loop configurations, the proposed OEO generates the Vernier effect due to the length disparity between the two loops. Consequently, by monitoring the frequency variations in the envelope of the OEO's micro-wave signal, the sensitivity scale factor for sensing information is significantly enhanced. Experimental findings reveal a magnetic field sensitivity of approximately 201 Hz/mT for the single loop, increasing to 8 kHz/mT with the application of the Vernier effect, which represents a 40-fold improvement. Furthermore, a Monel-400 alloy hosts the reference FBG, possessing a similar thermal expansion coefficient to GMM. This design mitigates temperature crosstalk in magnetic field measurements. Compared to utilizing an unprocessed reference FBG, the magnetic field error induced by temperature is reduced from 2.46 to 0.06 mT. Additionally, flexible sensitivity scale factors can be achieved by designing the varied path length differences. Experimental results demonstrate magnetic field sensitivities of 12.7 and 21.9 kHz/mT, with increases of 64 and 109 times, respectively.

Flux Density Measurement of Radial Magnetic Bearing with a Rotating Rotor Based on Fiber Bragg Grating-Giant Magnetostrictive Material Sensors.

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Research on Flux Observers in Active Magnetic Bearings

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

FBG-based non-contact vibration measurement and experimental study

Modeling and Design of Permanent Magnet Biased Radial-Axial Magnetic Bearing by Extended Circuit Theory

An FBG-Based Method for Load Measurement of a Cylindrical Rolling Element Bearing

Analytical Magnetic Field and Driving Force Models Based on Measured Boundary Conditions for Industrial Coriolis Mass Flowmeters

Experimental Study of Torque Measurement Based On FBG

Parameters design and characteristics analysis of E-core radial magnetic bearings

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

The Precise Modeling and Analysis of Demodulation Approach in Self-sensing Active Magnetic Bearings

Magnetic Field Measurement With Improved Scale Factor Based on a Dual-Loop Optoelectronic Oscillator With Vernier Effect Using a Cascaded GMM-FBG and Monel-400-FBG

Radial Displacement Measurement Method in Bearingless Slice Motor Through Eddy Current Displacement Sensors Positioned on the Underside of the Rotor

Experimental Investigation on Unbalance Response of a Shear-type Magnetorheologic Grease Damper Flexible Rotor System

Calculation and Measurement of the Magnetic Field of Nd2Fe14B Magnets for High-Temperature Superconducting Magnetic Bearing Rotor

Magnetic Circuit Design and Experiment of Novel Lorentz Magnetic Bearing with Double Air Gap

Research on transverse flux radial displacement sensor

Dynamic Force Calculation and Experimental Verification of Axial Bearings