Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Modeling and Design of Permanent Magnet Biased Radial-Axial Magnetic Bearing by Extended Circuit Theory

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Design and Analysis of Axial Hybrid Magnetic Bearing with Asymmetric Axial Air Gaps

Finite Element Analysis on Magnetic and Mechanical Characteristics for Hybrid Magnetic Bearing

Analysis and Compensation of Hysteresis Effect on Electromagnetic Force in Axial Magnetic Bearings

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Analytical Modeling of Permanent Magnet Biased Axial Magnetic Bearing with Multiple Air Gaps

Analytical Modeling of Air Gap Magnetic Fields and Bearing Force of a Novel Hybrid Magnetic Thrust Bearing

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Calculation of Leakage Coefficient for Hybrid Magnetic Bearing

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

A Novel Structure for Low-Loss Radial Hybrid Magnetic Bearing

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

A Novel Hybrid Analytical Model of Active Magnetic Bearing Considering Rotor Eccentricity and Local Saturation Effect

Design Optimization of a Novel Heteropolar Radial Hybrid Magnetic Bearing Using Magnetic Circuit Model

Nonlinear Model for Halbach Array Axial Flux Permeant Magnet Motor in Stator and Rotor Reference Frames Based on Harmonic Modeling Technique

Research on the Axial Magnetic Force of Axially Magnetized Bi-annular-shaped Permanent Magnetic Bearings

Analysis and Design of a Novel Heteropolar Radial Hybrid Magnetic Bearing