Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Analytical Modelling of Parasitic Force in Permanent Magnet Machines Accounting for Slotting Effect

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Analytical Analysis of Quasi-Halbach Array Permanent-Magnet Motors Based on Field Separation Theory

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Analytical Solution for Electromagnetic Performance Analysis of Permanent Magnet Synchronous Motor with a Parallel Magnetized Cylindrical Permanent Magnet

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

A Semi-Analytical Approach for the Optimization of High-Speed PMSM with Halbach Magnet Array

Analytical Model of Permanent Magnet Linear Synchronous Machines Considering End Effect and Slotting Effect

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Open-Circuit Air-Gap Magnetic Field Calculation of Interior Permanent Magnet Synchronous Motor With V-Shaped Segmented Skewed Poles Using Hybrid Analytical Method

Magnetic Field Analysis of an Inner-Mounted Permanent Magnet Synchronous Motor for New Energy Vehicles