Dynamic Force Calculation and Experimental Verification of Axial Bearings

Mingqi Wang,Jingjing Zhao,Xingnan Liu,Ni Mo,Zhengang Shi

DOI: https://doi.org/10.13052/2022.aces.j.370412

2022-01-01

Abstract:??? The axial bearing does not contain a lam-inated piece; so its dynamic performance is poor and often does not meet the load requirements. To accu-rately assess axial bearing performances during the design stage, it is necessary to accurately calculate the dynamic characteristics of the bearing, including ampli-tude, phase, and other parameters. Traditional stud-ies have generally used the magnetic circuit method (MCM) or the finite element method (FEM) to analyze the dynamic performance of bearings, and few exper-imental measurements are carried out. Some experi-ments use a Guess meter to measure the magnetic field at local locations without directly measuring the elec-tromagnetic force. In this paper, the dynamic force of axial bearing is measured by experiments, and the finite element calculation with Ansys Maxwell is car-ried out to study the influence of the gap, resonance, and other factors on the electromagnetic force. The comparison reveals a significant error in the calculation method using the initial gap because the gap between the stator and rotor changes with the dynamic force in the experiment. In this paper, the calculation method of ???analyzing the dynamic performance of the bearing with the actual gap after the DC component is energized as the calculation gap??? is proposed, which significantly reduces the calculation error and can ensure that the cal-culation error of amplitude and phase within 100 Hz is less than 5%. The method is of great significance for the engineering application of axial electromagnetic bearings.