Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Rotor Displacement Sensorless Control Strategy for PM Type Bearingless Motor Based on the Parameter Identification

Sensorless Operation of an Inset PM Bearingless Motor Implemented by the Combination Approach of MRAS and HF Signal Injection

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Self-Sensing Of The Rotor Position And Displacement For An Inset Permanent Magnet Type Bearingless Motor

Sensorless Control Strategy for Multiphase Induction Motor with Stator and Rotor Resistance Identification Based on Injecting Third Harmonic Current

Sensorless Interior-Pmsm Control with Rotational Inertia Adjustment

Displacement sensorless control of a bearingless induction motor based on modified high-frequency signal injection

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

Displacement sensorless control of a bearingless induction motor based on hybrid flux estimation

Radial Position Detection Of Five-Phase Bearingless Pm Motor

Research on Speed Sensorless Control Strategeis for Five-phase Induction Motors With Rotor Parameter Identification

Position Sensorless Control Based on Sliding Mode Observer for Multiphase Bearingless Motor with Single Set of Windings

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

A Multifrequency Disturbances Identification and Suppression Method for the Self-Sensing AMB Rotor System

Sensorless Control of PMSG for Wind Turbines Based on the On-Line Parameter Identification

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

High-Precision Parameter Identification Method for High Speed PMSM Based on Impedance Model and Current Injection

COMPARATIVE INVESTIGATION OF SENSORLESS CONTROL WITH TWO HIGH-FREQUENCY SIGNAL INJECTION SCHEMES

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity

Online Inductance Identification of Permanent Magnet Synchronous Motors Independent of Rotor Position Information