Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Analysis and design of axial inductive displacement sensor

A novel approach for sensitivity improvement of axial inductive displacement sensor

Research on Sensitivity of Axial Inductive Displacement Sensors with Constant Flux for Magnetic Bearings

An Inductive Sensor for the Angular Displacement Measurement of Large and Hollow Rotary Machinery

A novel inductive angular displacement sensor based on time-grating

An Inductive Sensor for Two-Dimensional Displacement Measurement

A Novel Eddy Current Sensor for Displacement Measurement with High Accuracy and Long Range

Research on New Displacement Sensor Used in Active Magnetic Bearing Systems

Radial Displacement Measurement Method in Bearingless Slice Motor Through Eddy Current Displacement Sensors Positioned on the Underside of the Rotor

A Novel Two-Dimensional Sensor With Inductive Spiral Coils

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

Design and Analysis of Four Axis Non-Orthogonal Displacement Sensor Circuit

Research on transverse flux radial displacement sensor

Rotor Displacement Sensorless Control Strategy for PM Type Bearingless Motor Based on the Parameter Identification

An Eddy Current Displacement Sensor Based on Piecewise Linearization of Inverse Function

An Absolute Linear Displacement Sensor Based on Orthogonal Dual Traveling Wave Magnetic Field

The Design of a New Type Differential Displacement Inductance Transducer

Rotor Position Detection Based on Magnetically Coupled Resonant Principle and Its Implementation

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Design of non‐contact capacitive displacement detection methods for magnetic levitated sphere