Abstract:Purpose: High purity, fine crystalline, degradation-free at low temperature powders have attracted special interest in CAD/CAM prosthetic dentistry full ceramic restorations. This study reports the preparation and characterisation of zirconia-ceria (0.9 ZrO2 0.1 CeO2) powders. Materials were obtained from zirconium-n-alkoxide and cerium nitrate hexahydrate in the pH 2-4 and 8-10. Methods: Zirconia- ceria powders were obtained with the sol-gel method in a humid-free environment. Thermal analysis (TGA/DTA) of the as-prepared materials was made for an assessment of its behaviour at elevated temperatures. Specimens were dried at 80 °C and calcinated in two stages: at 300 °C with soaking time 2.5 h and 850 °C with holding time 2.5 h, in order to evaluate the phase transformations. Thermal analyses of the as-dried powders were made for an assessment of its thermal behaviour during heat treatment up to 1000 °C. By X-ray diffraction (XRD), polymorphs of ZrO2 were identified. Additionally, scanning electron microscopy (SEM) and laser particle size distribution (PSD) were involved for characterisation of morphology of the powders. Results: A correlation between the pH of the colloidal system and the morphology of the as-obtained powders were found. Based on analysis (SEM, PSD), structures were identified known as soft and hard agglomerates. Conclusions: It can be stated that differences found between powder morphology were dependent on the value pH used, which can be crucial for powder densification during sintering and compacting green bodies which, as a consequence, may be crucial for the lifetime of zirconia prostheses. Correlations between phase composition and pH are difficult to grasp, and require further, more sophisticated, studies.

Effect of Ph Value on the Structure of Amorphous Zirconia Precursor under Coprecipitation

Influences of preparation parameters on the structural and catalytic performance of zirconia in isosynthesis

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Preparation of Zirconia Powders by Sol-gel Process

Ionothermal Synthesis and Characterization of Crystalline Zirconium Phosphate from Oxalic Acid/Tetrapropyl Ammonium Bromide System

Insight of precursor concentration, particle size and band gap of zirconia nanoparticles synthesized by co-precipitation method

Supercritical Hydrothermal Synthesis of Nano-Zirconia: Reaction Path and Crystallization Mechanisms of Different Precursors

Synthesis of PbZrO3 Powder by a COprecipitation Method

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Effects of Precipitators and Surfactants on the Preparation of Zirconia Nanopowders via Solvothermal Method

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

Preparation of amorphous ZrO2 powders by hydrothermal-assisted sol-gel method

Process - structure correlations in co-precipitation synthesized lanthanum zirconates

AMORPHOUS AND NANOCRYSTALLINE ZrO2·Y2O3(15%) STUDIED BY EXTENDED X-RAY ABSORPTION FINE STRUCTURE

Phase Composition Controllable Preparation of Zirconia Nanocrystals Via Solvothermal Method

Preparation and Microstructure of Nanometer Tetragonal Polycrystal Zirconia Powder at Low Temperature Condition

Evolution of the Crystalline Structure of Zirconia Nanoparticles During Their Hydrothermal Synthesis and Calcination: Insights into the Incorporations of Hydroxyls into the Lattice

Effect of Maltose for the Crystallization of Tetragonal Zirconia

Phase composition and morphology characteristics of ceria-stabilized zirconia powders obtained via sol-gel method with various pH conditions

Studies on Synthesis and Properties of Layered Zirconium Phosphate

Phase transition of nanostructure zirconias doped with rare earth elements.