Abstract:Commercial interest in nanomaterials and their applications lead to the development of many new methods for mass production. Among them, supercritical hydrothermal synthesis (SCHS) is a highly efficient and environmental-friendly technology. In this work, an advanced industrialized device for SCHS was used to verify the synthesis of nano-zirconia particles. The influencing laws and mechanisms of different material parameters (precursor type, precursor concentration, and pH) and process parameters (reaction temperature, reaction pressure, residence time, and Reynolds number) of nano-zirconia synthesis were studied. For the first time, the state changes of zirconium precursors and the precipitation behavior of nano-zirconia particles were in-situ observed by a high-speed camera. Central composite design (CCD) of response surface methodology (RSM) was adopted to investigate interactive effects of reaction temperature (200–420 °C), reactant concentration (0.01–0.6 mol L −1 ), alkali ratio (0–5) and flow rate (3–15 mL min −1 ), with particle size (APS), crystal form ratio (k) and reactant conversion rate (α) serving as response values. The influence of key process parameters follows an order of reaction concentration > reaction temperature > system flow > alkali ratio for APS, alkali ratio > system flow > reaction temperature > reaction concentration for k, and reaction temperature > alkali ratio > system flow > reaction concentration for α, respectively. The optimal process parameters were then obtained and further verified at lab and industrial scale. Zirconia powders with particle sizes of 4.98 nm and 8.74 nm were synthesized, respectively, indicating five hundred times magnification of continuous SCHS of nano zirconia from laboratory to industrialization.

Supercritical Hydrothermal Synthesis of Nano-Zirconia: Reaction Path and Crystallization Mechanisms of Different Precursors

From modification to mechanism: Supercritical hydrothermal synthesis of nano-zirconia

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Solvothermal Synthesis of Zirconia Nanomaterials: Latest Developments and Future

Supercritical hydrothermal synthesis of nano-zinc oxide: Process and mechanism

Response surface study on continuous supercritical hydrothermal synthesis of nano-zirconia: Scale-up from laboratory to industrialization

Mechanochemical dehydration and crystallization of supersaturated zirconia–alumina composite nano powders

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Preparation and Self-assembly of Zirconia Nanoparticles Via Hydrothermal Method

Optimization of the structure and morphology of monoclinic phase nanoscale zirconium dioxide

Phase Composition Controllable Preparation of Zirconia Nanocrystals Via Solvothermal Method

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

Synthesis and Pyrolysis Evolution of Glucose-Derived Hydrothermal Precursor for Nanosized Zirconium Carbide

Preparation of Zirconia Powders by Sol-gel Process

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Preparation and Microstructure of Nanometer Tetragonal Polycrystal Zirconia Powder at Low Temperature Condition

Solvent Effects on the Solvothermal Synthesis of PureMonoclinic and Tetragonal Zirconia Nanoparticles

Influences of preparation parameters on the structural and catalytic performance of zirconia in isosynthesis