Abstract:The Poly-Si/SiO x stack passivation structure incorporate doped polycrystalline silicon (Poly-Si) and tunneling silicon oxide (SiO x ) thin films allows for majority-carrier transport as well as block minority carriers and suppress recombination, and thus enable very high efficiency. Up to now the Poly-Si/SiO x stack passivation have been a widespread research topic for photovoltaic researchers, but most of the works are only focused on n-type doped structures and the rear side polished surface of the solar cells. In order to apply the Poly-Si/SiO x stack structure to the front textured surface and p + emitter region to obtain high-efficiency double-sided passivated contact solar cells and Si-based tandem cells in the future. In this work, passivation properties of Poly-Si/SiO x stack capped with SiN x :H layer are discussed based on different crystalline silicon surface morphologies, dopant types, doping profiles and thickness of Poly-Si layer. With proper doping process control, an excellent implied open-circuit voltage ( iVoc ) of 706 mV with a saturation current density ( J 0 ) value of 12 f A/cm 2 has been obtained for the boron-doped Poly-Si/SiO x stack capped with SiN x :H based on the textured surface, and an iVoc of 736 mV with a J 0 value of 2 f A/cm 2 has been acquired for the phosphorus-doped Poly-Si/SiO x stack capped with SiN x :H based on the acid polished surface. The results show that the polished surface and thinner Poly-Si layer are helpful for passivation. For the doped Poly-Si/SiO x stack structure, the doping source will penetrate the tunneling SiO x layer into the silicon bulk to form a certain penetration depth on the surface of the silicon substrate. In order to acquire the high iVoc (low J 0 ) value, a penetration depth of around 160 nm is needed to the phosphorus-doped Poly-Si/SiO x stack, while a penetration depth of less than 25 nm is required for boron-doped Poly-Si/SiO x stack. In addition, there is a linear relationship between the R sheet value and the reciprocal value of the Poly-Si (n + ) layer thickness.

Improved Surface Passivation of Rear SiN X /alo X Stacks in P‐type Boron‐Doped Czochralski Silicon Wafers During Dark Annealing at Elevated Temperatures

Improved Surface Passivation of Rear SiN x /AlO x Stacks in p-Type Boron-Doped Czochralski Silicon Wafers During Dark Annealing at Elevated Temperatures

Long-term stability study of the passivation quality of polysilicon-based passivation layers for silicon solar cells

Enhanced Si Passivation and PERC Solar Cell Efficiency by Atomic Layer Deposited Aluminum Oxide with Two-step Post Annealing

Enhanced passivation and stability of negative charge injected SiN x with higher nitrogen content on the boron diffused surface of n-type Si solar cells

Double Layers of Ultrathin A-Si:H and SiNx for Surface Passivation of N-Type Crystalline Si Wafers

Negatively Charged Silicon Nitride Films for Improved P-Type Silicon Surface Passivation by Low-Temperature Rapid Thermal Annealing

Passivation with sputtered silicon nitride and modified heat treatment for lifetime improvement

Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films

Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells

Efficiency improvement of PERC solar cell using an aluminum oxide passivation layer prepared via spatial atomic layer deposition and post-annealing

Low-temperature Annealing of Polycrystalline Si/sub 1-X/ge/sub X/ after Dopant Implantation

The Passivation Characteristics of Poly-Si/SiOx Stack for High-Efficiency Silicon Solar Cells

Electronic Properties of a-SiO<inline-formula><tex-math notation="LaTeX">${}_{x}$</tex-math> </inline-formula>N<inline-formula><tex-math notation="LaTeX">${}_{y}$</tex-math></inline-formula>:H/SiN<inline-formula> <tex-math notation="LaTeX">${}_{x}$</tex-math></inline-formula> Stacks for Surface Pass

Application of SiO2 Passivation Technique in Mass Production of Silicon Solar Cells

Effective Passivation of Black Silicon Surfaces via Plasma‐Enhanced Chemical Vapor Deposition Grown Conformal Hydrogenated Amorphous Silicon Layer

Investigation on the passivated Si/Al2O3 interface fabricated by non-vacuum spatial atomic layer deposition system

Optimization of the Surface Structure on Black Silicon for Surface Passivation

Study on Annealing Process of Aluminum Oxide Passivation Layer for PERC Solar Cells

Improving Silicon Surface Passivation with a Silicon Oxide Layer Grown via Ozonated Deionized Water