Abstract:We report a solid strategy to realize heteroface mono‐Si wafers for PERC‐SE solar cells, by employing alkaline polishing for the rear and well‐established MCCE etching to form honeycomb texture for the front in one wet process successively. It can double the throughput of existing texturing processes and reduce the etching wastewater. Passivated emitter and rear cell (PERC) with laser‐doped selective emitter (SE) has become mainstream in the PV industry. In this work, we report a solid strategy to realize heteroface monocrystalline silicon (mono‐Si) wafers for PERC‐SE solar cells by employing alkaline polishing to form a polished surface for the rear side and well‐established metal‐catalyzed chemical etching to form a honeycomb texture for the front side in one wet process successively. The key to success lies in the fact that the two back‐to‐back wafers inserted into one slot in the cassette are tightly attached together in MCCE etching so that only the exposed surfaces are etched to form textures, while the rear polished surfaces are still retained to avoid wrap‐around etching. With the strategy, the mono‐Si PERC‐SE solar cells achieve an average efficiency of over 22.0%, no poorer than that of the reference system (traditional alkaline texturing and rear acidic polishing), and have good light trapping capability for oblique incident light. Moreover, the total Si removal in the novel process is only ~0.4 g, which is far less than that in the traditional process. More importantly, the strategy can also double the throughput of existing texturing processes and significantly reduce the amount of etching waste. Therefore, the work is expected to provide a promising way to mass produce efficient mono‐Si PERC‐SE solar cells with a superior rear surface, achieved without increasing the number of processing steps, and lower cost.

Optimization of Rear-Side Passivation for Enhancing the Performance of Bifacial PERC+ Solar Cells

Tuning Back Side Passivation for Enhancing the Performance of PERC Solar Cells

Application of SiOxNy films in industrial bifacial PERC solar cells

Influence of Al2O3/SiNx Rear-Side Stacked Passivation on the Performance of Polycrystalline PERC Solar Cells

Effective Way to Reduce Rear-Side Potential-Induced Degradation of Bifacial PERC Solar Cells

Improvement of Light Trapping in Bifacial PERC Silicon Solar Cells by Optimizing the Rear Surface Morphology

Optimization of rear surface roughness and metal grid design in industrial bifacial PERC solar cells

Industrail Technology of Passivated Emitter and Rear Cells with Silicon Oxynitride and Silicon Nitride As Rear Passivation for High Efficiency BIPV Modules

Improved Bifacial Properties of P‐Type Passivated Emitter and Rear Cell Solar Cells toward High Mass Production Efficiency

Optimization of Controllable Factors in the Aluminum Silicon Eutectic Paste and Rear Silicon Nitride Mono-Passivation Layer of PERC Solar Cells

Improved Al 2 O 3 / SiN x and SiO 2 / SiN x stack passivation layer structure PERC sc‐silicon solar cells on mass production line

Light management of PERC solar cell with the front and back dielectric multilayers

High-efficiency N-Type Silicon PERT Bifacial Solar Cells with Selective Emitters and Poly-Si Based Passivating Contacts

Numerical study of mono-crystalline silicon solar cells with passivated emitter and rear contact configuration for the efficiency beyond 24% based on mass production technology

Effect of Rear Pyramid Structures on Industrial Bifacial PERCs under Omnidirectional Incidence

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Rear-Sided Passivation by SiN X :H Dielectric Layer for Improved Si/PEDOT:PSS Hybrid Heterojunction Solar Cells

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

A solid strategy to realize heteroface selective emitter and rear passivated silicon solar cells

Recombination Behaviour of Passivated Emitter and Rear Cell (PERC) Bifacial Silicon Solar Module under Different Illuminations

Enhanced Si Passivation and PERC Solar Cell Efficiency by Atomic Layer Deposited Aluminum Oxide with Two-step Post Annealing