Abstract:Multi-gigahertz fundamental repetition rate, tunable repetition rate and wavelength, ultrafast fiber lasers at wavelengths of 1.0, 1.5, and 2.0 µm are experimentally demonstrated and summarized. At the wavelength of 1.0 µm, the laser wavelength is tuned in the range of 1040.1-1042.9 nm and the repetition rate is shifted by 226 kHz in a 3-cm-long all-fiber laser by controlling the temperature of the resonator. Compared with a previous work where the maximum average power was 0.8 mW, the power in this study is significantly improved to 57 mW under a launched pump power of 213 mW, thus achieving an optical-to-optical efficiency of 27%. For comparison, a similar temperature-tuning technique is implemented in a Tm3+-doped ultrafast oscillator but, as expected, it results in a broader tunable range of 14.1 nm (1974.1-1988.2 nm) in wavelength as compared with the value of 1.8 nm for the wavelength of 1.0 µm. The repetition rate in the process is shifted by 294 kHz. For the high-frequency range from 100 kHz to 10 MHz, the value of integrated timing jitter gradually increases with an increase in temperature. Finally, to the best of our knowledge, for the first time, a new method for tuning wavelength and repetition rate is proposed and demonstrated for a femtosecond fiber laser at the wavelength of 1.5 µm. Through fine rotation of the alignment angle between the Er/Yb:glass fiber and a semiconductor saturable absorption mirror, the peak wavelength can be tuned in the range of 1591.4-1586.1 nm and the repetition rate is shifted by 60 kHz.

Attosecond Timing Jitter from High Repetition Rate Femtosecond "Solid-State Fiber Lasers"

A Novel and Highly Stable 840 MHz Repetition Rate Femtosecond Fiber Laser

Attosecond timing jitter from an all-PM Er:fiber laser on "optical cubes"

High-repetition-rate Ultrafast Fiber Lasers.

Attosecond Timing Jitter from an NALM Mode-Locked Er:Fiber Laser on “optical Cubes”

All-fibre photonic signal generator for attosecond timing and ultralow-noise microwave

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Compact Passively Mode-Locked Fiber Laser at 1.55 Μm with Low Timing Jitter of 8 Fs

Sub-Femtosecond Timing Jitter from a SESAM Mode-Locked Yb-Fiber Laser

Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

Timing Jitter of High Repetition Rate Mode-locked Fiber Lasers

Environmentally-stable 50-Fs Pulse Generation Directly from an Er:fiber Oscillator

Sub-10-Attosecond Timing Jitter Mode-Locked Ti:sapphire Lasers

Attosecond Precision Multi-km Laser-Microwave Network

Synchronized Two-Color Mode-Locked Fiber Laser Source with GHz Repetition Rate

Attosecond-Resolution Er:Fiber-Based Optical Frequency Comb

Attosecond precision multi-kilometer laser-microwave network

1.2 GHz Repetition Rate Stretched-pulse from a Femtosecond Solid-state Yb: Fiber Laser

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

Advances in High Repetition Rate Femtosecond Fiber Lasers

Compact, stable 1 GHz femtosecond Er-doped fiber lasers