Abstract:Multi-gigahertz fundamental repetition rate, tunable repetition rate and wavelength, ultrafast fiber lasers at wavelengths of 1.0, 1.5, and 2.0 µm are experimentally demonstrated and summarized. At the wavelength of 1.0 µm, the laser wavelength is tuned in the range of 1040.1-1042.9 nm and the repetition rate is shifted by 226 kHz in a 3-cm-long all-fiber laser by controlling the temperature of the resonator. Compared with a previous work where the maximum average power was 0.8 mW, the power in this study is significantly improved to 57 mW under a launched pump power of 213 mW, thus achieving an optical-to-optical efficiency of 27%. For comparison, a similar temperature-tuning technique is implemented in a Tm3+-doped ultrafast oscillator but, as expected, it results in a broader tunable range of 14.1 nm (1974.1-1988.2 nm) in wavelength as compared with the value of 1.8 nm for the wavelength of 1.0 µm. The repetition rate in the process is shifted by 294 kHz. For the high-frequency range from 100 kHz to 10 MHz, the value of integrated timing jitter gradually increases with an increase in temperature. Finally, to the best of our knowledge, for the first time, a new method for tuning wavelength and repetition rate is proposed and demonstrated for a femtosecond fiber laser at the wavelength of 1.5 µm. Through fine rotation of the alignment angle between the Er/Yb:glass fiber and a semiconductor saturable absorption mirror, the peak wavelength can be tuned in the range of 1591.4-1586.1 nm and the repetition rate is shifted by 60 kHz.

A Novel and Highly Stable 840 MHz Repetition Rate Femtosecond Fiber Laser

Attosecond Timing Jitter from High Repetition Rate Femtosecond "Solid-State Fiber Lasers"

Environmentally-stable 50-Fs Pulse Generation Directly from an Er:fiber Oscillator

A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

High-repetition-rate Ultrafast Fiber Lasers.

165 MHz highly stable femtosecond Er:ZBLAN fiber laser operating at 2.8 µm

10Ghz Non-Pm Based Ultra Stable Pico-Second Pulsed Fiber Laser

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

A Femtosecond Hybrid Mode-Locking Fiber Ring Laser at 409 MHz

A Novel 852-Nm Tunable Fiber Laser

High Repetition Rate Passively Mode-Locked Fiber Laser with A Composite Cavity Structure for Repetition Rate Control

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Compact, stable 1 GHz femtosecond Er-doped fiber lasers

419 Fs Hybridly Mode-Locked Er-doped Fiber Laser at 212 MHz Repetition Rate

10 GHz Regeneratively Mode-Locked Thulium Fiber Laser with a Stabilized Repetition Rate

Compact all-fiber ring femtosecond laser with high fundamental repetition rate.

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Dual-Wavelength Ultra-Stable Laser Operating at 780 Nm and 852 Nm

Experimental study on stable 10-GHz actively mode-locked fiber ring laser

330 Mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser