Abstract:A highly stable figure-9 Yb-doped fiber laser with all polarization-maintaining (PM) double-cladding fiber is demonstrated. Through leveraging the saturable absorption effect of a nonlinear amplifying loop mirror, both the Q-switched and mode-locked operation are realized by adjusting the pump power. With increasing the pump power from the threshold to the maxima, the repetition rate of the Q-switched pulses is linearly increased from 14.9 kHz to 138.0 kHz with the pulse duration accordingly reduced from 3.9 µs to 970 ns. The corresponding maximum average power and pulse energy are respectively 2.34 W and 17 µJ, which are more than ten times larger than the common material-based Q-switched all-fiber lasers. In addition, in the process of increasing and decreasing the pump power, an optical bistability that manifested as a significant power jumping effect is observed, while its effect on the pulse repetition rate and duration is trivial. Whereas for the single pulse mode-locked operation, a maximum output power of 56.3 mW with a fundamental repetition rate of 12.5 MHz is realized, corresponding to a pulse energy of 4.5 nJ. To the best of our knowledge, it is much higher than the most of previous works concerning figure-9 all-PM-fiber lasers of which the emitted pulse energy is generally less than 1 nJ. After being compressed by a pair of diffraction grating, a minimum pulse width of 378 fs and a maximum peak power of 9.76 kW are respectively obtained. In addition, through characterizing the spectral and temporal properties of the laser source, the excellent stability of both the Q-switched and mode-locked operations is verified.

10Ghz Non-Pm Based Ultra Stable Pico-Second Pulsed Fiber Laser

Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

Environmentally-stable 50-Fs Pulse Generation Directly from an Er:fiber Oscillator

All-fiber GHz few-cycle pulse generation at 2 µm

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

10 GHz Regeneratively Mode-Locked Thulium Fiber Laser with a Stabilized Repetition Rate

Experimental study on stable 10-GHz actively mode-locked fiber ring laser

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Stable Mode-Locked Nanosecond Chirp-Free Pulse Generation with Ultra-Narrow Bandwidth

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

Generation of 10 GHz 2 Ps Short Laser Pulses Using an Electroabsorption Modulator and Two-Stage Compression

GHz fundamental repetition rate femtosecond Er:fiber laser mode locked by nonlinear polarization evolution

10 GHz, 9 ps pulses generation from an actively mode-locked fiber ring laser

Wavelength Tunable Picosecond Pulse Generation at 10-80Ghz Repetition Rates with Semiconductor Fiber Ring Laser

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

A Simple 10-Ghz Picosecond Pulse Source Based on Fiber Optical Parametric Oscillator

Generation of 48 Fs, 1 GHz Fundamentally Mode-Locked Pulses Directly from an Yb-doped “Solid-State Fiber Laser”

Ultrafast PM Fiber Ring Laser Mode-Locked by Nonlinear Polarization Evolution with Short NPE Section Segments

Highly stable Q-switched and mode-locked pulse generation from an all-PM figure-9 fiber laser.