Abstract:GHz pulsed thulium-doped fiber laser with stabilized repetition rate can enable a wide range of applications. By employing regenerative mode-locking and cavity stabilization technique, we have for the first time demonstrated a 10 GHz polarization-maintaining thulium-doped fiber laser, which has a long-term repetition-rate stabilization and picosecond timing-jitter. In our experiment, a RF circuitry is designed to extract the 10 GHz longitudinal clock signal so that stable regenerative mode-locking is achieved. A piezo actuator-based phase-lock-loop is used to lock the regeneratively mode-locked pulses to a local reference synthesizer. The regeneratively mode-locked pulses with picosecond pulse width exhibit a high super-mode suppression ratio of 60 dB. In addition, the repetition rate of the laser shows good long-term stability with a variation of 8 Hz in 8 hours, corresponding to a cavity free spectral range fluctuation of less than 16 mHz. Meanwhile, the Allan deviation of the stabilized 10 GHz regeneratively mode-locked pulses is measured to be as low as 2 x 10(-12) over 1000 s average time, which is only limited by the stability of the reference synthesizer. Such an ultra-stable 10 GHz pulsed thulium fiber laser may find potential application in 2 mu m optical communication, material processing and spectroscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Sub-10-Attosecond Timing Jitter Mode-Locked Ti:sapphire Lasers

Yoctosecond Timing Jitter Sensitivity in Tightly Synchronized Mode-Locked Ti:Sapphire Lasers

Unveiling out-of-loop attosecond timing jitter precision in Ti:sapphire mode-locked lasers with an optical heterodyne technique

Independently tunable 1.3 W femtosecond Ti:sapphire lasers passively synchronized with attosecond timing jitter and ultrahigh robustness.

Highly Stable Synchronized Femtosecond Ti:sapphire Laser with 1.3 W Powers and Sub-Femtosecond Timing Jitter

Attosecond Timing Jitter from High Repetition Rate Femtosecond "Solid-State Fiber Lasers"

Sub 100fs Timing Jitter Of Mode-Locked Laser

Sub-Femtosecond Timing Jitter from a SESAM Mode-Locked Yb-Fiber Laser

Timing Jitter of High Repetition Rate Mode-locked Fiber Lasers

Attosecond timing jitter from an all-PM Er:fiber laser on "optical cubes"

Low-noise mode-locking in a GHz repetition rate Tm3+-doped fiber laser

Attosecond Timing Jitter from an NALM Mode-Locked Er:Fiber Laser on “optical Cubes”

Pulse synthesis in the single-cycle regime from independent mode-locked lasers using attosecond-precision feedback

Precise Control of Femtosecond Ti:sapphire Laser Frequency Comb

Generation of 4.5mw Femtosecond Pulse with A Compact All Solid-State Cavity-Dumped Ti : Sapphire Laser

15 fs-pulse generation from a self-mode-locked Ti:sapphire laser with low pump power

10Ghz Non-Pm Based Ultra Stable Pico-Second Pulsed Fiber Laser

An ultrafast electro-optic light source with sub-cycle precision

Long-Term Stabilization Of Mode-Locked Er-Fiber Lasers With 1.2 Fs Timing Jitter

Obtaining constant sub-25 ns pulse in a Q-switched Tm laser with around 100 kHz repetition frequency

10 GHz Regeneratively Mode-Locked Thulium Fiber Laser with a Stabilized Repetition Rate