Study of the inhibition mechanism of sapphire subsurface damage by tangential ultrasonic vibration
Fei ZhouJinkai XuWentong ZhangHuadong Yua School of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun,Chinab Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing,Changchun University of Science and Technology,Changchun,Chinac School of Mechanical and Aerospace Engineering,Jilin University,Changchun,China
DOI: https://doi.org/10.1080/15376494.2024.2328760
2024-03-23
Mechanics of Advanced Materials and Structures
Abstract:Ultrasonic vibration has a certain effect on the crack propagation tendency during sapphire grinding, but the mechanism of the effect on the crack propagation tendency has not yet been elucidated. In this study, tangential ultrasonic vibratory scratching and normal scratching sapphire processes were simulated using the discrete element method, and the expansion tendency of sub-surface cracks in the scratching sapphire process was analyzed in terms of cutting forces and stresses. The results of the study show that the crack depth decreases with increasing scratch speed and increases with increasing scratch depth; The greater the variation in cutting force, the greater the number of cracks formed and the crack propagation is mainly distributed near the maximum residual tensile stress; The introduction of tangential ultrasonic vibration induces a decrease in residual tensile stresses and an increase in residual compressive stresses, thus inhibiting subsurface crack propagation; The suppression of subsurface cracks becomes more pronounced as the amplitude increases. Finally, tangential ultrasonic vibratory scratching and normal scratching sapphire experiments were comparatively studied and the experimental results were in agreement with the simulation results. This study provides some theoretical guidance for the suppression of subsurface cracks in sapphire materials during the grinding process.
materials science, multidisciplinary,mechanics, composites, characterization & testing