Abstract:Due to the randomness of hard and brittle material damage evolution, assessing damage and interpreting mechanisms is challenging. This study focuses on analyzing material damage mechanisms by employing extensive multi-source heterogeneous data to extract quantitative information. A machine vision-based method for detecting and assessing defects in ceramics was proposed, achieving 98 % accuracy. Leveraging this method in scratching experiments, the progression of damage and micro-failure mechanisms in Si3N4 was investigated through the analysis of defect area distribution, force and acoustical signals. Results revealed that the distribution of defect areas conforms to a three-parameter Weibull distribution. At scratch depths of 0.01, 0.02 mm, approximately 90 % of damage accumulated within 1e2–1e4 μm 2 ; conversely, 0.03–0.06 mm led to a decrease to 30 – 40 %. Extensive crack propagation occurs within 0.02–0.03 mm, resulting in the intersecting formation of spalling blocks. Damage evolution occurs in three stages: shallow and small cracks with scattered spalling blocks in the first stage, deep and long cracks with continuous and irregularly shaped spalling blocks in the second stage, and nearly no cracks with continuous and regularly shaped blocks in the third stage. This study not only proposes an efficient method to detect and evaluate ceramic defects, but also deeply understands the evolution process of material damage mechanism. Considering defect distribution and statistical trends, this research not only provide guidance for the optimization of machining parameters, especially in the scene of specific precision and high removal rate. At the same time, the damage evolution and failure mechanism of Si 3 N 4 provide useful experimental basis and data support for deepening the understanding of material behavior during ultra-precision grinding.

Evaluation and Measurement of Surface/Subsurface Crack Damage of Ground Ceramics

Study on the Model of Surface Crack Depth in Ceramics Grinding

Method of Damage Characterization of Engineering Ceramics Grinding Surface

Characterization of Engineering Ceramics Ground Surface Based on Fractal Theory

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Analysis on Ground Surface Damage of Quartz Fiber-Reinforced Quartz Composites

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Quantification of micro-damage evolution process in ceramics through extensive analysis of multi-source heterogeneous data

Strength evaluation of brittle ceramics with surface defects subjected to thermal shock

Quantitative Evaluation of Closed Cracks on the Surface of Stainless Steel by Microwaves

Evaluations on Ceramic Fracture Toughness Measurement by Edge Chipping

Contact Damage and Damage Tolerance of Dental Ceramics

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Research on microscopic fracture mechanism of glass-ceramics grinding surface based on progressive scratch test

Size-dependent Damage and Fracture of Two-Layer Systems

Accurate evaluation of critical flaw size in structural ceramics via femtosecond laser

Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

Identification of Subsurface Mesoscale Crack in Full Ceramic Ball Bearings Based on Strain Energy Theory

Investigation of Micro-defects in Dental Ceramics and Damage Evolution

Characterization on Fracture Toughness of Cermet Coating Coupling Instrumented Indentation and X‐Ray Computed Tomography