Abstract:Due to the randomness of hard and brittle material damage evolution, assessing damage and interpreting mechanisms is challenging. This study focuses on analyzing material damage mechanisms by employing extensive multi-source heterogeneous data to extract quantitative information. A machine vision-based method for detecting and assessing defects in ceramics was proposed, achieving 98 % accuracy. Leveraging this method in scratching experiments, the progression of damage and micro-failure mechanisms in Si3N4 was investigated through the analysis of defect area distribution, force and acoustical signals. Results revealed that the distribution of defect areas conforms to a three-parameter Weibull distribution. At scratch depths of 0.01, 0.02 mm, approximately 90 % of damage accumulated within 1e2–1e4 μm 2 ; conversely, 0.03–0.06 mm led to a decrease to 30 – 40 %. Extensive crack propagation occurs within 0.02–0.03 mm, resulting in the intersecting formation of spalling blocks. Damage evolution occurs in three stages: shallow and small cracks with scattered spalling blocks in the first stage, deep and long cracks with continuous and irregularly shaped spalling blocks in the second stage, and nearly no cracks with continuous and regularly shaped blocks in the third stage. This study not only proposes an efficient method to detect and evaluate ceramic defects, but also deeply understands the evolution process of material damage mechanism. Considering defect distribution and statistical trends, this research not only provide guidance for the optimization of machining parameters, especially in the scene of specific precision and high removal rate. At the same time, the damage evolution and failure mechanism of Si 3 N 4 provide useful experimental basis and data support for deepening the understanding of material behavior during ultra-precision grinding.

Method of Damage Characterization of Engineering Ceramics Grinding Surface

A Study on Grinding Surface Waviness of Woven Ceramic Matrix Composites

Evaluation and Measurement of Surface/Subsurface Crack Damage of Ground Ceramics

Study on the Model of Surface Crack Depth in Ceramics Grinding

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Characterization of Engineering Ceramics Ground Surface Based on Fractal Theory

Analysis on Ground Surface Damage of Quartz Fiber-Reinforced Quartz Composites

Quantification of micro-damage evolution process in ceramics through extensive analysis of multi-source heterogeneous data

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Investigations on Grinding Process of Woven Ceramic Matrix Composite Based on Reinforced Fiber Orientations

Study on the Correlativity Between Grinding Parameters and Surface Residual Stresses in Ceramic

Effects of Meso-Structure in Grinding of 2.5D Woven Fiber-Reinforced Ceramic Composites

Study on morphology reconstruction of SiC ceramics ground by monolayer-patterned grinding wheel considering strain rate effect

Surface damage characteristics and identification based on acoustic emission in diamond point grinding carbon/carbon ceramic matrix composites

Surface damage characteristics of AlN ceramics induced by ultra-precision grinding

Diamond wheel grinding characteristics of 3D orthogonal quartz fiber reinforced silica ceramic matrix composite

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Effect of grinding parameters on surface quality in internal grinding of silicon nitride ceramics

Research on microscopic fracture mechanism of glass-ceramics grinding surface based on progressive scratch test

Effects of Grinding Parameters on the Processing Temperature, Crack Propagation and Residual Stress in Silicon Nitride Ceramics