Abstract:Due to the randomness of hard and brittle material damage evolution, assessing damage and interpreting mechanisms is challenging. This study focuses on analyzing material damage mechanisms by employing extensive multi-source heterogeneous data to extract quantitative information. A machine vision-based method for detecting and assessing defects in ceramics was proposed, achieving 98 % accuracy. Leveraging this method in scratching experiments, the progression of damage and micro-failure mechanisms in Si3N4 was investigated through the analysis of defect area distribution, force and acoustical signals. Results revealed that the distribution of defect areas conforms to a three-parameter Weibull distribution. At scratch depths of 0.01, 0.02 mm, approximately 90 % of damage accumulated within 1e2–1e4 μm 2 ; conversely, 0.03–0.06 mm led to a decrease to 30 – 40 %. Extensive crack propagation occurs within 0.02–0.03 mm, resulting in the intersecting formation of spalling blocks. Damage evolution occurs in three stages: shallow and small cracks with scattered spalling blocks in the first stage, deep and long cracks with continuous and irregularly shaped spalling blocks in the second stage, and nearly no cracks with continuous and regularly shaped blocks in the third stage. This study not only proposes an efficient method to detect and evaluate ceramic defects, but also deeply understands the evolution process of material damage mechanism. Considering defect distribution and statistical trends, this research not only provide guidance for the optimization of machining parameters, especially in the scene of specific precision and high removal rate. At the same time, the damage evolution and failure mechanism of Si 3 N 4 provide useful experimental basis and data support for deepening the understanding of material behavior during ultra-precision grinding.

Study on the Model of Surface Crack Depth in Ceramics Grinding

Evaluation and Measurement of Surface/Subsurface Crack Damage of Ground Ceramics

Method of Damage Characterization of Engineering Ceramics Grinding Surface

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

A Study on Grinding Surface Waviness of Woven Ceramic Matrix Composites

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Study of Prefabricated Crack Propagation on Monocrystalline Silicon Surfaces for Grinding Damage Analysis

Effect of grinding parameters on surface quality in internal grinding of silicon nitride ceramics

Effects of Grinding Parameters on the Processing Temperature, Crack Propagation and Residual Stress in Silicon Nitride Ceramics

Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

Study on morphology reconstruction of SiC ceramics ground by monolayer-patterned grinding wheel considering strain rate effect

Grinding Force Model and Experimental Study on Ultrasonic Assisted Spiral Grinding of Silicon Carbide Ceramic Materials

Surface Roughness Model of Ground 4H-SiC Considering Ductile and Brittle Removal

Quantification of micro-damage evolution process in ceramics through extensive analysis of multi-source heterogeneous data

Grindability and surface quality of SiCp/Al composites with resin bond and electroplated wheels

Numerical simulation of single abrasive grain grinding of silicon carbide surface

Investigation on the Surface Morphology of Si3N4 Ceramics by a New Fractal Dimension Calculation Method