Abstract:The investigation on the machining damage evolution and material removal mechanism of anisotropic brittle material is of vital interest for controlling surface and subsurface damage. In this work, with the combination of stress field analysis and scratching experiments, the evolution of various cracks and the mechanism of material removal in the scratching process of anisotropic brittle material were decoupled to determine the inducing conditions and coupling modes of different cracks. Firstly, an improved elastic stress field model was established considering anisotropy characteristics, tool shape, and material elastic recovery. Furthermore, the scratching experiments of single crystal silicon with varying crystal orientations were carried out. Finally, the characteristics of subsurface damage were analyzed by transmission electron microscopy, and the interaction between dislocation and crack was investigated. The results show that the lateral crack first initiates and propagates on the material subsurface under the tensile stress behind the tool. With the influence of the cleavage surface, radial cracks gradually form on the material surface. Median cracks induced by the tensile stress initiated at the front of the tool. The geometric overlap of the opening radial crack and lateral crack resulting in brittle removal in the form of massive brittle stripping. The theoretical results agreed well with the experimental results, the average error of prediction of radial crack propagation direction is less than 9.4%. There is a strong crystal orientation dependence in the damage evolution process. The scratching of crystal orientation [100] is more conducive to the ductile machining due to its lower elastic stress and higher dislocation density. This research contributes to a deeper comprehension of the damage evolution and the crystal orientation dependence of anisotropic brittle material.

Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

Research on the mechanism of tool-workpiece coupling contact and theoretical modeling of surface roughness in turning brittle materials

Study on the Model of Surface Crack Depth in Ceramics Grinding

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Finite Element Modeling of Brittle and Ductile Modes in Cutting of 3C-Sic

Roughness Analysis in Line-Contact Rotating-Milling Cylindrical Surface

Theoretical Equation of Cutting Temperature for Brittle Materials in Turning Fluorophlogopite Ceramics

Material removal mechanism of brittle-ductile transition in milling SiC ceramic and experimental verification

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Dynamic modeling of the turning process of slip-cast fused silica ceramics using the discrete element method

A cutting force theoretical model under the wear effect in turning glass–ceramics

Critical Undeformed Chip Thickness of Brittle Materials in Single Point Diamond Turning

Surface Roughness Model of Ground 4H-SiC Considering Ductile and Brittle Removal

Effect of Crack Propagation on Surface Formation Mechanism and Surface Morphology Evaluation of Longitudinal–torsional Composite Ultrasonic Mill Grinding of Si3N4

Fundamental Investigation on Damage Evolution and Material Removal Mechanism in Scratching Anisotropic Brittle Material

Surface Observations and Material Removal Mechanisms in Rotary Ultrasonic Machining of Brittle Material

The Surface Roughness Modeling on Turn-Milling Process and Analysis of Influencing Factors

Research on microscopic fracture mechanism of glass-ceramics grinding surface based on progressive scratch test

Study on Brittle-Ductile Transition Mechanism of Ultra-Precision Turning of Single Crystal Silicon

Experimental investigation on the problems in the achievement of super-smooth surface of cemented carbide WC-Co through diamond turning

A Study on the Influence of Process Parameters on the Workpiece Surface Quality in the Cutting of Hard and Brittle Materials with Trepanning Drill