Abstract:The current research on theoretical modeling of the surface roughness of brittle materials generally regards the tool as a rigid body. Incorporating tool factors into theoretical models of surface roughness is challenging because the influence of tool-workpiece coupling contact on surface roughness remains unclear. This paper investigates the tool-workpiece coupling contact mechanism using contact mechanics analysis: collision contact between the rake face and the material, adhesive contact between the cutting edge roundness and the material, and hertz contact between the flank face and the material. The tool-workpiece coupling contact causes the material to fracture and break, and the tool undergoes collision wear, adhesive wear, and abrasive wear. The formation of pits is attributed to the tool's cutting action on the workpiece, whereas the presence of hard convex peaks is a consequence of the workpiece's reverse cutting into the tool. A quantitative description of hard convex peaks and pits on machined surfaces was based on contact mechanics, fracture mechanics, and tribology. A novel theoretical model is developed for characterizing the surface roughness of brittle materials. Turning verification experiments were carried out using different tools, workpieces, and tool parameters. The predicted values and experimental measurements are similar and have the same trend, indicating that the model is accurate. This paper is the first to consider both the tool and the workpiece as the influencing objects of the surface roughness of brittle materials, and it innovatively incorporates tool wear and tool material properties into the parameters of the theoretical model of surface roughness. It offers a fresh perspective on predicting the theoretical surface roughness model for brittle materials.

Research on the mechanism of tool-workpiece coupling contact and theoretical modeling of surface roughness in turning brittle materials

Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

A cutting force theoretical model under the wear effect in turning glass–ceramics

An accurate 3D surface topography model for single-point diamond turning

Theoretical Roughness Modeling of Hard Turned Surfaces Considering Tool Wear

Study of the surface generation mechanism and roughness distribution in internal spline shaping in consideration of tool wear

A mechanistic cutting force model based on ductile and brittle fracture material removal modes for edge surface grinding of CFRP composites using rotary ultrasonic machining

An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials

Surface Roughness Model of Ground 4H-SiC Considering Ductile and Brittle Removal

Theoretical investigation on the flank milled roughness profile in quasi-homogeneous materials

Mathematical modeling and experimental verification of surface roughness in micro-end-milling

Mathematical Model for Cutting Force in Rotary Ultrasonic Face Milling of Brittle Materials

Computational Modeling of Tool-Rock Frictional Contact With Anisotropic Damage

Analysis, Modeling and Experimental Study of the Normal Contact Stiffness of Rough Surfaces in Grinding

Analytical modeling of surface generation in ultrasonic ball burnishing including effects of indentation pile-up/sink-in and chipping fracture

Experimental investigation on the problems in the achievement of super-smooth surface of cemented carbide WC-Co through diamond turning

Surface roughness prediction in ball screw whirlwind milling considering elastic-plastic deformation caused by cutting force: Modelling and verification

Contact Analysis of Abrasive Wear

A Fractal Contact Model for Rough Surfaces considering the Variation of Critical Asperity Levels