Abstract:The current research on theoretical modeling of the surface roughness of brittle materials generally regards the tool as a rigid body. Incorporating tool factors into theoretical models of surface roughness is challenging because the influence of tool-workpiece coupling contact on surface roughness remains unclear. This paper investigates the tool-workpiece coupling contact mechanism using contact mechanics analysis: collision contact between the rake face and the material, adhesive contact between the cutting edge roundness and the material, and hertz contact between the flank face and the material. The tool-workpiece coupling contact causes the material to fracture and break, and the tool undergoes collision wear, adhesive wear, and abrasive wear. The formation of pits is attributed to the tool's cutting action on the workpiece, whereas the presence of hard convex peaks is a consequence of the workpiece's reverse cutting into the tool. A quantitative description of hard convex peaks and pits on machined surfaces was based on contact mechanics, fracture mechanics, and tribology. A novel theoretical model is developed for characterizing the surface roughness of brittle materials. Turning verification experiments were carried out using different tools, workpieces, and tool parameters. The predicted values and experimental measurements are similar and have the same trend, indicating that the model is accurate. This paper is the first to consider both the tool and the workpiece as the influencing objects of the surface roughness of brittle materials, and it innovatively incorporates tool wear and tool material properties into the parameters of the theoretical model of surface roughness. It offers a fresh perspective on predicting the theoretical surface roughness model for brittle materials.

A cutting force theoretical model under the wear effect in turning glass–ceramics

Research on three-dimensional cutting force theoretical model of turning glass–ceramics based on discretization of cutting edge

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Research on the mechanism of tool-workpiece coupling contact and theoretical modeling of surface roughness in turning brittle materials

The Effect of Tool Wear on the Damaged Layer Thickness and Tool Wear Rate in Ultra-Precision Turning of Quartz Glass

Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

Cutting Model Considering Damage Layer Thickness for Ultra-Precision Turning of Quartz Glass

Model for Predicting the Micro-Grinding Force of K9 Glass Based on Material Removal Mechanisms

Curvature effect induced cutting stress field offset and its influence on the damage of hard and brittle materials

Mathematical Model for Cutting Force in Rotary Ultrasonic Face Milling of Brittle Materials

Molecular Dynamics Simulation of Micro Cutting Process of Abrasive Wear

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

A semi-analytical model for predicting tool wear progression in drilling CFRP

The influence of wear volume on surface quality in grinding process based on wear prediction model

A hybrid model for turning force based on shear and extrusion deformation considering cutting-edge radius

Numerical model of unidirectional CFRP in machining: Development of an amended friction model

An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials

Research on microscopic fracture mechanism of glass-ceramics grinding surface based on progressive scratch test

Analytical and experimental investigation on cutting force in longitudinal-torsional coupled rotary ultrasonic machining zirconia ceramics

Dynamic modeling of the turning process of slip-cast fused silica ceramics using the discrete element method