Abstract:Fused silica glass is widely used in aircraft portholes, space telescopes, solar panels, etc. due to its excellent properties. In such environments, dust and debris with extremely high speed can easily create high impact loads on the silica glass surfaces, which would incur impact damage on the fused silica components and shorten their service life. Machining-induced surface defects on fused silica components would aggravate their damage behaviors, but the influencing rules and the underlying mechanisms has not been fully revealed. This work focuses on the influence of surface scratch defects on the impact damage characteristics of fused silica optics under the extremely high impact load. An improved Johnson-Holmquist Ⅱ (JH-2) dynamic constitutive model of fused silica was established on basis of the stress-strain relationship obtained by the Split Hopkinson Pressure Bar (SHPB) experiments. Based on that constitutive model, a dynamic simulation model describing the impact damage process induced by scratch defects was established by combining the smoothed particle hydrodynamics (SPH) algorithm and arbitrary Lagrange-Euler (ALE) algorithms. Then, the influence of scratch defect size on the impact damage morphology and crack propagation behaviors under various impact angles was systematically analyzed. The results show that, the impact damage induced by scratches with depths of 5 μm and 25 μm is more serious than scratches with other sizes. And under the impact angles of 45° and 60°, the damage extent of the optical surface with 10 μm-depth scratch is significantly lower than the defect-free surface. Finally, the laser-driven flyer experiment was performed to validate the role of scratch defects in influencing the impact damage characteristics of fused silica components under extremely high impact loads. The deviation between simulation and experimental results is generally within 10% except for one specific case that could be well explained, thus verifying the reliability of the established constitutive model and dynamic simulation model. This work could offer theoretical guidance and parameter basis for controlling the surface defects introduced in the machining processes and resultantly improving the impact damage resistance of fused silica components.

Curvature effect induced cutting stress field offset and its influence on the damage of hard and brittle materials

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Crack extension mechanism and scratch stress field model of hard and brittle materials caused by curvature effect

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Interference mechanism and damage accumulation in high-speed cross scratches on hard brittle materials

Cross-point effect of high-speed cross scratch on hard brittle materials

Subsurface damage evaluation in the single abrasive scratching of BK7 glass by considering coupling effect of strain rate and temperature

Theoretical modeling and experimental analysis of single-grain scratching mechanism of fused quartz glass

Cracking behavior during scratching brittle materials with different-shaped indenters

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

A material point method based investigation on crack classification and transformation induced by grit geometry during scratching silicon carbide

Analytical Modelling of Both Parallel and Cross Grinding with Arc-Shaped Wheel for Grinding-Induced Damage and Grinding Force

Models of grinding-induced surface and subsurface damages in fused silica considering strain rate and micro shape/geometry of abrasive

Cutting Model Considering Damage Layer Thickness for Ultra-Precision Turning of Quartz Glass

Optimization of grinding process for hard and brittle materials based on damage evolution mechanism

Study on morphology reconstruction of SiC ceramics ground by monolayer-patterned grinding wheel considering strain rate effect

Vibration-assisted material damage mechanism: From indentation cracks to scratch cracks

Research on microscopic fracture mechanism of glass-ceramics grinding surface based on progressive scratch test

Study of the inhibition mechanism of sapphire subsurface damage by tangential ultrasonic vibration

Effect of scratches on the damage characteristics of fused silica optics under extremely-high impact load

Surface Micro-Morphology Model Involved in Grinding of GaN Crystals Driven by Strain-Rate and Abrasive Coupling Effects