Abstract:Ultrasonic-assisted electrolytic in-process dressing (UA-ELID) grinding is a promising technology that uses a metal-bonded diamond grinding wheel to achieve a mirror surface finish on hard and brittle materials. In this paper, the UA-ELID grinding was applied to nanocomposite ceramic for investigating the cavitation effect on the processing performance. Firstly, the ultrasonic cavitation theory was utilized to define the cavitation threshold, collapse of cavitation bubbles, and variation of their radii. Next, the online monitoring system was designed to observe the ultrasonic cavitation under different ultrasonic amplitude for the actual UA-ELID grinding test. A strong effect of ultrasonic cavitation on the grinding wheel surface and the formed oxide film was experimentally proved. Besides, under the action of ultrasonic vibration, the dressing effect of the grinding wheel was improved, and the sharpness of grain increased by 43.2%, and the grain distribution was dramatically changed with the increase of ultrasonic amplitude. Compared with the conventional ELID (C-ELID) grinding, the average protrusion height increased by 14.2%, while the average grain spacing dropped by 21.2%. The UA-ELID grinding reduced the workpiece surface roughness Rz and Ra by 54.2% and 46.5%, respectively, and increased the surface residual compressive stress by 44.5%. The surface morphology observation revealed a change in the material removal mechanism and improvement of the surface quality by ultrasonic cavitation effect. These findings are considered instrumental in theoretical and experimental substantiation of the optimal UA-ELID grinding parameters for the processing of nanocomposite ceramics.

Study on Ductile Grinding Character of Nano ZrO2 Ceramics using Ultrasonic Vibration Grinding

Study on Critical Ductile Grinding Depth of Nano Zro2 Ceramics by the Aid of Ultrasonic Vibration

Study on surface quality of nano ZrO2 ceramics in grinding by the aid of ultrasonic vibration

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Study on nodular cast iron surface topography and abrasive wear in ultrasonic vibration assisted grinding

Research on ultrasonic grinding ZrO2 ball valve with a cup-shaped diamond grinding wheel

Surface Properties of Ultrasonic Vibration-Assisted ELID Grinding ZTA Ceramics

Kinematics and Simulation Analysis of Longitudinal-Torsional Ultrasonic Assisted Grinding of Zirconia Ceramics

Tribological properties of surface topography in ultrasonic vibration-assisted grinding of zirconia ceramics

Effect of Single Grit Impacts on Initiation and Propagation of Cracks in Ultrasonic Assisted Grinding of Ceramics by Using SPH Method

Experimental Study on the Effect of Grinding Path in Tangential Ultrasonic-Assisted Grinding for the Curved Surfaces of Zirconia Ceramics

Molecular dynamics simulations of ultrasonic vibration-assisted grinding of polycrystalline iron: Nanoscale plastic deformation mechanism and microstructural evolution

Study On The Surface Quality Of Silicon Nitride Ceramics In Ultrasonic Vibration Grinding

Characteristic analysis of rotating ultrasonic machining applied in zirconia grinding

Cavitation Effect in Ultrasonic-Assisted Electrolytic In-Process Dressing Grinding of Nanocomposite Ceramics

Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics

Experimental study on ultrasonic-assisted grinding of micro-structured surface on silicon carbide using small diameter grinding wheel

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

Investigation on Grinding Force and Machining Quality During Rotary Ultrasonic Grinding Deep-Small Hole of Fluorophlogopite Ceramics

A Study on Tangential Ultrasonic-Assisted Mirror Grinding of Zirconia Ceramic Curved Surfaces