Abstract:Axial ultrasonic vibration-assisted face grinding (AUVAFG) of SiC has the characteristics of high efficiency and serious damage. With the aim of solving the problem of serious surface damage in AUVAFG of SiC ceramics, a composite ultrasonic vibration-assisted face grinding (CUVAFG) method involving axial vibration and elliptic vibration is proposed, which not only ensures the high efficiency but also maintains high quality of the machined surface. In this paper, the grinding forces and the surface quality were investigated by conducting comparative experiments on axial and composite ultrasonic vibration-assisted face grinding using a single diamond. The effects of ultrasonic vibration amplitude and wheel speed on grinding forces, ground surface roughness, and ground surface morphology were analyzed to reveal the brittle-ductile removal behavior of SiC ceramics during the micro-cutting process caused by elliptic ultrasonic vibration. The results show that CUVAFG can effectively reduce the grinding forces by about 15%, reduce the ground surface roughness by approximately 40.7%, and induce ductile removal to acquire good surface finish with predominantly facets in comparison to AUVAFG. More specifically for CUVAFG, with increased elliptic ultrasonic vibration amplitude along the long axis, the grinding forces are reduced by minor amplitude, but remain constant in the case of major amplitude. When the elliptic vibration amplitude is close to the critical chip thickness of brittle-ductile transition, the number of facets on workpiece surface is the highest, but the grinding forces and the surface roughness are relatively low. Meanwhile, with the increase of wheel speed, the number of facets and the proportion of ductile removal are both increased, but the grinding forces and the surface roughness are decreased. In order to realize low-damage machining of SiC ceramics by CUVAFG, it is suggested to keep the elliptic ultrasonic vibration amplitude around the critical chip thickness of brittle-ductile transition and use minor axial ultrasonic vibration amplitude and high wheel speed to achieve lower grinding forces and good surface quality.

Study on cutting performance of ceramic rock slab machined by rotating ultrasonic vibration

An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of Sio2f/Sio2 Composites

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Effect of Ultrasonic Vibration Assisted Grinding Process on Surface Topography and Properties of C/SiC Composite

Theoretical and Experimental Investigation on Inclined Ultrasonic Elliptical Vibration Cutting of Alumina Ceramics

Precision Grinding Technology of Silicon Carbide (SiC) Ceramics by Longitudinal Torsional Ultrasonic Vibrations

Kinematics and Simulation Analysis of Longitudinal-Torsional Ultrasonic Assisted Grinding of Zirconia Ceramics

Analysis on ground surface in ultrasonic face grinding of silicon carbide (SiC) ceramic with minor vibration amplitude

Axial and composite ultrasonic vibration-assisted face grinding of silicon carbide ceramics: grinding force and surface quality

Study on the removal mechanism of Si3N4 ceramic material in rotary ultrasonic grinding based on multi-abrasive coupling simulation

Material removal mechanism of SiC ceramics by elliptic ultrasonic vibration-assisted grinding (EUVAG) using single grain

On the Tool Wear Behavior During Ultrasonic Vibration-Assisted Form Grinding with Alumina Wheels

Research on ultrasonic grinding ZrO2 ball valve with a cup-shaped diamond grinding wheel

Material Removal Mechanism in Rotary Ultrasonic Machining of High-Volume Fraction SiCp/Al Composites

Analytical and experimental investigation on cutting force in longitudinal-torsional coupled rotary ultrasonic machining zirconia ceramics

A new method for machining RB-SiC with high efficiency and quality: Laser assisted ultrasonic grinding

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

Theoretical and experimental investigations on rotary ultrasonic surface micro-machining of brittle materials

Research on Material Removal Mechanism of C/SiC Composites in Ultrasound Vibration-Assisted Grinding

On understanding the cutting mechanism of SiCp/Al composites during ultrasonic elliptical vibration-assisted machining

On the Grinding Performance of Alumina Wheels in Ultrasonic Vibration–assisted Grinding of Hardened GCr15 Steel