Stability Investigation of the Titanium-Based Eco-Friendly Perovskite-Like Antifluorite Cs2TiBr6

Yizhou He,Xiaowei Guo,Huiyi Zheng,Liyifei Xv,Shaorong Li

DOI: https://doi.org/10.1039/d2tc00729k

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:The air, oxygen, moisture, thermal, and illumination stability of Cs2TiBr6are investigated.

What problem does this paper attempt to address?

Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Xin-Feng Diao,Yan-lin Tang,Tian-yu Tang,Quan Xie,Kun Xiang,Gao-fu Liu

DOI: https://doi.org/10.1080/00268976.2019.1665200

2019-09-12

Molecular Physics

Abstract:In order to better understand and elucidate the structural stability of perovskite materials, the lattice parameters and tolerance factors of three crystal structures of perovskite materials are calculated based on the first principle of density functional theory. We find that the perovskite crystal structures are relatively stable and is consistent with the experimental facts as the tolerance factor 0.81 < T < 1.11. The elastic modulus of three crystal structures of MAPbI3, FAPbI3 and the elastic modulus of FA0.75Cs0.25Sn0.5PB0.5I3 are studied. By Voigt-Reuss-Hill approximation, the elastic properties such as bulk modulus, shear modulus, Young's modulus and Poisson's ratio are obtained. From the elastic modulus Cij, we can find that the other six kinds of crystal structures are relatively stable except for the orthogonal structure of MAPbI3 (c). The ductility and brittle toughness of the material are also discussed by B/G and Poisson's ratio. It is found that MAPbI3 (a) is the hardest and FAPBI3 (a) the weakest. Form the three-dimensional surface view of Young's modulus it is found that their dependence in three-dimensional direction is spherical for an isotropic system. The degree of deviation of the Young's modulus sphere reflects the anisotropy of crystal structures. The degree of elastic anisotropy of organic–inorganic perovskite materials follows the order of FAPbI3(c) > MAPbI3(a) > FA0.75 Cs0.25 Sn0.5Pb0.5I3 > FAPbI3(a) > MAPbI3(b) > MAPbI3(c) >FAPbI3(b). Furthermore, by the adsorption energies and density of states (DOS) of these seven crystals for water molecules, the reasons why perovskite materials are easily denatured in high humidity environment were explored. The results show that perovskite materials are easy to denaturate in high humidity environment.

chemistry, physical,physics, atomic, molecular & chemical
Solution processed lead-free cesium titanium halide perovskites and their structural, thermal and optical characteristics

Deying Kong,Dali Cheng,Xuewen Wang,Kaiyuan Zhang,Huachun Wang,Kai Liu,Huanglong Li,Xing Sheng,Lan Yin

DOI: https://doi.org/10.1039/c9tc05711k

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:Metal halide based perovskite materials have attracted tremendous interest in optoelectronics. Although conventional lead (Pb) based organic/inorganic halide perovskites have been extensively studied and have realized highly efficient devices like solar cells and light emitting diodes, they are plagued with the toxicity of the Pb element, restraining their applications in environmentally and biologically friendly scenarios. Substitutes for Pb ions have been suggested, yet most of the Pb-free perovskites suffer from low stability and inferior efficiencies compared to their Pb based counterparts. In this work, we explore the synthesis of cesium titanium halide perovskites (Cs2TiX6, X = Cl, Br). At room-temperature, aqueous solution-based processes are developed to grow thermally stable, high quality Cs2Ti(BrxCl1-x)(6) (0 < x < 1) crystals and films in large volume. Their structural, thermal and optical properties are systematically studied in experiments and compared with first principles calculations. The produced materials demonstrate a tunable, quasi-direct band gap from similar to 1.7 eV to similar to 2.5 eV and photoluminescence peaked from similar to 535 nm to B670 nm. Furthermore, the materials are stable in an ambient environment up to similar to 500 degrees C. These Pb-free perovskite materials will create opportunities for novel optical and electronic devices used in eco-friendly and bio-friendly environments.
Stabilization of environmentally-friendly Cs 2 TiBr 6 perovskite nanocrystals with SnBr 4

Shanti Maria Liga,Yongjie Wang,Gerasimos Konstantatos

DOI: https://doi.org/10.1039/d3cc00581j

IF: 4.9

2023-01-01

Chemical Communications

Abstract:Cs 2 TiBr 6 vacancy-ordered double perovskite suffers from instability in air. In this paper, we demonstrate a method to stabilize it using a post-synthetic treatment with SnBr 4 .

chemistry, multidisciplinary
Structure ,thermal Expansion and Thermal Stability of Aluminium Titanate Materials

徐刚,韩高荣

DOI: https://doi.org/10.3321/j.issn:1005-023x.2003.12.013

2003-01-01

Abstract:In this paper,research on the structure,thermal expansion and thermal stability of aluminium ti- tanate materials is reviewed. Aluminium titanate is a member of the pseudobrookite family, which belongs to or-thorhombic system. Aluminium titanate ceramics exhibit a very low thermal expansion coefficient,low thermal conductivity and excelleng thermal shock resistance. These propertis arise from the microstructure of Al2TiO3 which is characterized by microcracking along the grain boundaries because of the pronounced anisotropy in thermal expansion of its crystallites. However,aluminium titanate is only stable from the kinetic point of view at low temperature and has a strong tendency to decompose into the parent oxide below 1280C? The formation of Al2TiO5-MgTi2O5 or Al2TiO5-Fe2TiO5 solid solution, which can decrease the thermodynamic decomposition temperature and increase the structure entropy of aluminium tianate,can effectively improve the thermal stability in comparison to pure Al2TiO5. The mechanism of the decomposition of aluminium titanate in reductive atmosphere is unclear and needs further investigation.
Encapsulation of CsPb2Br5 in TiO2 Microcrystals to Enhance Environmental Stability

Yuezhu Wang,Xiaotong Xu,Wenchao Yang,Yawen Wei,Junsheng Wang

DOI: https://doi.org/10.3390/mi14122186

IF: 3.4

2023-12-01

Micromachines

Abstract:All-inorganic lead halide perovskite has emerged as an attractive semiconducting material due to its unique optoelectronic properties. However, its poor environmental stability restricts its broad application. Here, a simple method for the fabrication of CsPb2Br5/TiO2 is investigated. The introduction of p-aminobenzoic acid, which has two functional groups, is critical for the capping of amorphous TiO2 on CsPb2Br5. After calcination at 300 °C, amorphous TiO2 crystallizes into the anatase phase. The CsPb2Br5/TiO2 NCs show high long-term stability in water and enhanced stability against ultraviolet radiation and heat treatment, owing to the chemical stability of TiO2. More importantly, photo-electrochemical characterizations indicate that the formation of TiO2 shells can increase the charge separation efficiency. Hence, CsPb2Br5/TiO2 exhibits improved photoelectric activity owing to the electrical conductivity of the TiO2 in water. This study provides a new route for the fabrication of optoelectronic devices and photocatalysts based on perovskite NCs in the aqueous phase. Furthermore, the present results demonstrate that CsPb2Br5/TiO2 NCs has considerable potential to be used as a photoelectric material in optical sensing and monitoring.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Danger in the Dark: Stability of Perovskite Solar Cells with Varied Stoichiometries and Morphologies Stressed at Various Conditions

Roja Singh,Hang Hu,Thomas Feeney,Alexander Diercks,Felix Laufer,Yang Li,The Duong,Fabian Schackmar,Bahram A. Nejand,Ulrich W. Paetzold

DOI: https://doi.org/10.1021/acsami.4c04350

IF: 9.5

2024-05-17

ACS Applied Materials & Interfaces

Abstract:The long-term stability of perovskite solar cells (PSCs) remains a bottleneck for commercialization. While studies on the stoichiometry and morphology of PSCs with regard to performance are prevalent, understanding the influence of these factors on their long-term stability is lacking. In this work, we evaluate the impact of stoichiometry and morphology on the long-term stability of cesium formamidinium-based PSCs. We demonstrate that the lead iodide (PbI(2)) to formamidinium iodide (FAI) ratio...

materials science, multidisciplinary,nanoscience & nanotechnology
Thermal Stability Analysis of Formamidinium–Cesium‐Based Lead Halide Perovskite Solar Cells Fabricated under Air Ambient Conditions

Binita Boro,Snehangshu Mishra,Paulomi Singh,Basudev Lahiri,Shailendra Kumar Varshney,Trilok Singh

DOI: https://doi.org/10.1002/ente.202400034

IF: 4.149

2024-05-21

Energy Technology

Abstract:Effect of compositional tuning of mixed‐cation and mixed‐halide perovskite (FA1−yCsyPb(I0.85Br0.15)3) has been analyzed for structural and thermal stability of the perovskite film. Perovskite film with 10% Cs demonstrates reduced microstrain and enhanced thermal stability. Fabricated device utilizing FA0.9Cs0.1Pb(I0.85Br0.15)3 perovskite and Top‐3 as hole‐transport layer achieves 17.70% efficiency with a promising device shelf‐life time. The instability of perovskite solar cells (PSCs) remains a major bottleneck for their commercialization, with thermal instability posing a major concern, given the inevitable presence of heat in photovoltaic devices. Mixed‐cation/halide perovskites demonstrate enhanced stability and efficiency compared to single‐cation/halide perovskites. Identifying the optimal perovskite composition capable of withstanding high temperatures for longer durations is crucial for the development of thermally stable PSCs. This study provides valuable insights into the optimization of mixed‐cation/halide perovskites to enhance the thermal and structural stability of perovskite films. By systematically varying the Cs content in FA1−yCsyPb(I0.85Br0.15)3 (0

energy & fuels
Stability of 2D and quasi-2D perovskite materials and devices

Tik Lun Leung,Ishaq Ahmad,Ali Ashger Syed,Alan Man Ching Ng,Jasminka Popović,Aleksandra B. Djurišić

DOI: https://doi.org/10.1038/s43246-022-00285-9

2022-09-06

Communications Materials

Abstract:Different 2D and quasi-2D perovskite materials have demonstrated significant improvements in the device stability compared to 3D perovskites due to their increased hydrophobicity and suppressed ion migration. However, fundamental investigations of these materials have been scarce and consequently detailed understanding of the processes responsible for experimental phenomena are often lacking despite huge interest in these materials. Even more importantly, there have been a limited number of structure-property studies for different material compositions, and research is generally by trial and error rather than by design. Here we discuss different stability issues in these materials and identify questions which need to be answered to design materials with further stability improvements.
Structure and Optical Properties of Cs2TiBrxI6−x

Wenchao Tang,Shuai Fu,Xiaofan Sun,Shulin Jiao,Junjie Jiang,Cuiping Xu,Hongling Cai,X. S. Wu

DOI: https://doi.org/10.1016/j.mtcomm.2024.109859

IF: 3.8

2024-01-01

Materials Today Communications

Abstract:The objective of this research was to develop lead-free double-perovskite materials with adjustable optical bandgaps for improved optoelectronic performance. By experimental synthesis and theoretical analysis, we investigated the effects of iodine doping on the structure and optical properties of double-perovskite samples. Key findings indicate a significant bandgap reduction from 1.82eV to 1.08eV with increasing iodine levels, beneficial for solar cell and photodetector applications. Addressing the environmental and stability issues of traditional halide perovskites, we focused on titanium-based double-perovskite due to its abundance, non-toxicity, and stable oxidation state. Utilizing Powder X-ray Diffraction (PXRD) and Ultraviolet/Visible (UV/vis) spectroscopy, we characterized the synthesized materials. Density Functional Theory (DFT) computations predicted electronic structures and optical behaviors, aligning with experimental data. Thermodynamic and kinetic stability assessments confirmed the materials' practical viability. Photoluminescence (PL) experiments further elucidated bandgap attributes, enhancing our comprehension of photovoltaic processes. Concisely, this study provides a theoretical and empirical basis for the advancement of lead-free double-perovskite materials, propelling progress in solar energy conversion and photodetection technologies.
Study On Stability Of Structure And Properties Of Tiopc/San Photoconductive Composites

Qiang Zheng,Lifang Tong,Weili Li,Mang Wang

2003-01-01

Chinese Journal of Polymer Science

Abstract:The influence of the condensed structure of poly(styrene-co-acrylonitrile) (SAN) and traces of tetrahydrofuran (THF) that remained in titanyl phthalocyanine (TiOPc)/SAN films after fabrication on the photoconductive stability of TiOPc/SAN composites is studied. The results reveal that the existence of traces of THF results in the increase of the photoconductivity and the charging voltage. The main factors responsible for the unstable photoconductivity of the photoconductors are believed to be the relaxation of SAN and the slow volatilization of THF.
Stability Improvement of Tin‐Based Halide Perovskite by Precursor‐Solution Regulation with Dual‐Functional Reagents

Xiangrong Cao,Jingrui Li,Hua Dong,Peizhou Li,Qinhua Fan,Ruoyao Xu,Haomiao Li,Guijiang Zhou,Zhaoxin Wu

DOI: https://doi.org/10.1002/adfm.202104344

IF: 19

2021-07-14

Advanced Functional Materials

Abstract:Tin-based halide perovskites have attracted great attention in the perovskite solar cells (PSCs) community with their suitable band gaps, excellent optoelectronic properties, and non-toxicity. However, because of their poor chemical stability, it is challenging to fabricate highly stable and efficient tin PSCs (TPSCs). In this study, the origin of the Sn2+ oxidation ahead of film formation is concentrated on, and it is found that the ionization of SnI2 in precursor plays a decisive role. Accordingly, SnI2 dissociation and the subsequent Sn2+ oxidation can be restricted in precursor by employing reductive complexes as additives. This dual-functional source-regulating strategy effectively helps prepare high-quality perovskite films with low Sn4+ defect densities. As a result, the unencapsulated TPSCs show a considerable power-conversion efficiency of 10.03% (certified 9.38%) and maintain 90% of its initial efficiency after 1000 h of light aging testing.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Thermal stability study of transition metal perovskite sulfides

Shanyuan Niu,JoAnna Milam-Guerrero,Yucheng Zhou,Kevin Ye,Boyang Zhao,Brent C. Melot,Jayakanth Ravichandran

DOI: https://doi.org/10.1557/jmr.2018.419

IF: 2.7

2018-11-15

Journal of Materials Research

Abstract:Abstract

materials science, multidisciplinary
In situ high temperature X-ray diffraction studies of mixed ionic and electronic conducting perovskite-type membranes

Haihui Wang,Cristina Tablet,Weishen Yang,Jürgen Caro

DOI: https://doi.org/10.1016/j.matlet.2005.06.067

IF: 3

2005-01-01

Materials Letters

Abstract:Phase structure and stability of three typical mixed ionic and electronic conducting perovskite-type membranes, SrCo0.8Fe0.2O3−δ (SCF), Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) and BaCo0.4Fe0.4Zr0.2O3−δ (BCFZ) were studied by in situ high temperature X-ray diffraction at temperatures from 303 to 1273 K and under different atmospheres (air, 2% O2 in Ar and pure Ar) at 1173 K. By analyzing their lattice parameters the thermal expansion coefficients (TECs) of BSCF, SCF and BCZF are obtained to be 11.5×10−6 K−1, 17.9×10−6 K−1 and 10.3×10−6 K−1, respectively. A relationship between phase stability and TEC was proposed: the higher is the TEC, the lower is the operation stability of the perovskite materials.
Exploring High-Performance All-Inorganic perovskite materials for Next-Generation photovoltaic Applications: A theoretical study on Cs 2 TlBiX 6 (X = Cl, Br, I)

Fangfang Qi,Xifeng Fu,Lingyi Meng,Can-Zhong Lu

DOI: https://doi.org/10.1016/j.comptc.2024.114500

IF: 2.292

2024-02-05

Computational and Theoretical Chemistry

Abstract:Numerous endeavors are committed to investigating innovative perovskite materials characterized by superior thermal stability, aimed at their application in the next-generation of photovoltaic technologies. We employ density functional theory to compute the geometrical and electronic structures and to quantify the photoelectric properties of Cs 2 TlBiX 6 (X = Cl, Br, I) perovskites. These compounds exhibit excellent structural stability, ideal direct bandgaps, and high light absorption coefficients (10 5 cm −1 ), rendering them well-suited for application as photovoltaic absorbers. We assess mechanical and thermal stability by evaluating structure factors, elastic constants, and regions of stable chemical potential. Additionally, we explore the impact of defects in Cs 2 TlBiI 6 on its photovoltaic performance.

chemistry, physical
Halogen engineering of 2D/3D tin halide perovskite for enhanced structural stability

Huanhuan Yao,Weike Zhu,Jie Hu,Cheng Wu,Shurong Wang,Xuhong Zhao,Xiaobin Niu,Liming Ding,Feng Hao

DOI: https://doi.org/10.1016/j.cej.2022.140862

IF: 15.1

2022-12-15

Chemical Engineering Journal

Abstract:Stability is one of the key factors limiting the development of lead-free tin halide perovskite solar cells (TPSCs). Large organic bulky phenethylammonium ions (PEA + ) have been widely introduced in TPSCs to regulate the dimensionality and film growth of perovskite. However, the mismatch in ionic radius of halogen ions could compromise the structural stability. Here, we report the halogen engineering of bulky additives in tin perovskites and their effect on the lattice stability and device performance. It was revealed that partial substitution of PEAI with PEABr could improve the structural stability as well as the charge transfer by the density functional theory calculations. A reduced residual strain along the ( h 00) planes and improved crystallinity was observed after the introduction of PEABr. The halogen engineering reduced the defect density remarkably and inhibited the non-radiative recombination. As a consequence, the target inverted FA 0.75 MA 0.25 SnI 2.75 Br 0.25 (FA = formamidinium, MA = methylammonium) TPSCs obtained a power conversion efficiency (PCE) of 11.94 % with an open-circuit voltage ( V oc ) of 0.81 V, which was significantly higher than that of the device in absence of PEABr (PCE of 9.79 % and V oc of 0.75 V). Meanwhile, the unencapsulated devices maintained 94 % of the initial PCE after 2040 h storage in the N 2 atmosphere.

engineering, chemical, environmental
Robust Stability of Efficient Lead-Free Formamidinium Tin Iodide Perovskite Solar Cells Realized by Structural Regulation

Weiyin Gao,Chenxin Ran,Jingrui Li,Hua Dong,Bo Jiao,Lijun Zhang,Xuguang Lan,Xun Hou,Zhaoxin Wu

DOI: https://doi.org/10.1021/acs.jpclett.8b03194

2018-01-01

Abstract:The instability issue of Pb-free Sn-based perovskite is one of the biggest challenges for its application in optoelectronic devices. Herein, a structural regulation strategy is demonstrated to regulate the geometric symmetry of formamidiniumtin iodide (FASnI(3)) perovskite. Experimental and theoretical works show that the introduction of cesium cation (Cs+) could improve the geometric symmetry, suppress the oxidation of Sn2+, and enhance the thermodynamical structural stability of FASnI(3). As a result, the inverted planar Cs-doped FASnI(3)-based perovskite solar cell (PSC) is shown to maintain 90% of its initial power-conversion efficiency (PCE) after 2000 h stored in N-2, which is the best durability to date for 3D Sn-based PSCs. Most importantly, the air, thermal, and illumination stabilities of the PSCs are all improved after Cs doping. The PCE of the Cs-doped PSC shows a 63% increase compared to that of the control device (from 3.74% to 6.08%) due to the improved quality of the Cs-doped FASnI(3) film.
Superstable Cs x SnBr x +2 @CsBr Nanocrystals with Over 1200 h of Half-Value PLQY in Air

Shuang Yang,Yinan Lao,Wenjin Yu,Zhenyu Tang,Haoqing Guo,Ganghong Liu,Bo Qu,Lixin Xiao,Zhijian Chen

DOI: https://doi.org/10.1021/acsami.3c07002

IF: 9.5

2023-07-22

ACS Applied Materials & Interfaces

Abstract:Tin-based perovskites comprise one of the preferred nontoxic alternatives to Pb-based perovskites due to their desirable optoelectronic properties. However, there remains a crucial stability problem due to the property of Sn^(2+) oxidation. In this study, we reported stable tin-based perovskite nanocrystals (NCs) using stannous acetate as the Sn^(2+) source because of its stronger Sn-O bonding. To prevent the oxidation of Sn^(2+), a thin layer of CsBr coverage was formed in situ; tin-based...

materials science, multidisciplinary,nanoscience & nanotechnology
STUDY ON STABILITY OF STRUCTURE AND PROPERTIES OF TIOPC／SAN PHOTOCONDUCTIVE COMPOSITES

QiangZHENG,Li-fangTong,Li-weiLi,MangWANG

2003-01-01

Abstract:The influence of the condensed structure of poly(styrene-co-acrylonitrile) (SAN) and traces of tetrahydrofuran (THF) that remained in titanyl phthalocyanine (TiOPc)/SAN films after fabrication on the photoconductive stability of TiOPc/SAN composites is studied. The results reveal that the existence of traces of THF results in the increase of the photoconductivity and the charging voltage. The main factors responsible for the unstable photoconductivity of the photoconductors are believed to be the relaxation of SAN and the slow volatilization of THF.
Hybrid Inorganic Electron-Transporting Layer Coupled with a Halogen-Resistant Electrode in CsPbI2Br-Based Perovskite Solar Cells to Achieve Robust Long-Term Stability.

Shasha Zhang,Weitao Chen,Shaohang Wu,Rui Chen,Zhenghao Liu,Yuqian Huang,Zhichun Yang,Hongmei Zhu,Jiangyu Li,Liyuan Han,Wei Chen

DOI: https://doi.org/10.1021/acsami.9b17464

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Along with the rapidly developed power conversion efficiencies (PCEs), operational stability of perovskite solar cells (PSCs) remains a bottleneck for further commercialization. The instability mainly arises from the unstable organic components in the whole devices and the responsive metal electrode to the halogens from perovskites. In this work, we develop a carbide-titanium oxide (C-TiO2) hybrid electron-transporting layer (ETL) and a halogen-resistant Sb electrode on top of the inorganic CsPbI2Br layer to solve the issues of instability. The hybrid C-TiO2 presents a uniform and pinhole-free morphology, adequate band structure and electronic property, and observably strong stability. On the other hand, Sb is demonstrated to be effective to restrict inferior ion diffusion and further perovskite decomposition. As a result, our well-designed PSCs achieve both high efficiencies (14.8% for the champion device) and long-term stabilities (<6% decline @ 85 degrees C, dark, <10% decline @ 60 degrees C, continuous illumination) of 1000 h.
Atomic-Scale Insights into Surface Instability in Halide Perovskites

Shulin Chen,Yu-Ning Wu,Yiliu Wang,Jiawei Chen,Jianxun Lu,Zhou Li,Xin Song,Jiayi Wang,Siyu Li,Ruirong Bai,Jinhua Hong,Chao Ma,Osman M Bakr,Peng Gao

DOI: https://doi.org/10.1021/acs.nanolett.4c04559

IF: 10.8

2024-01-01

Nano Letters

Abstract:The pathway of surface structure evolution plays a vital role in determining the stability of the halide perovskites. Understanding the mechanism of surface instability and how external stimuli interact with the surface is essential for developing strategies to mitigate the degradation of halide perovskites. Here, we directly observed structural evolutions on the surface of CsPbBr3 via an integrated differential phase contrast scanning transmission electron microscope. We find that surface degradation, different from bulk decomposition, follows a layer-by-layer pathway in the CsPbBr3 perovskite. This layer-by-layer decomposition method further facilitated a coating strategy to mitigate the degradation via preserving the integrity of the surface layer, as verified through in situ methods. Thus, we have achieved the improved stability of perovskites and as-fabricated light-emitting diodes. These findings advance the fundamental understanding on the mechanism of surface instability and effectiveness of coating, thus providing guidance for future study of surface protection toward stable optoelectronic devices.

Stability Investigation of the Titanium-Based Eco-Friendly Perovskite-Like Antifluorite Cs2TiBr6

Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Solution processed lead-free cesium titanium halide perovskites and their structural, thermal and optical characteristics

Stabilization of environmentally-friendly Cs 2 TiBr 6 perovskite nanocrystals with SnBr 4

Structure ,thermal Expansion and Thermal Stability of Aluminium Titanate Materials

Encapsulation of CsPb2Br5 in TiO2 Microcrystals to Enhance Environmental Stability

Danger in the Dark: Stability of Perovskite Solar Cells with Varied Stoichiometries and Morphologies Stressed at Various Conditions

Thermal Stability Analysis of Formamidinium–Cesium‐Based Lead Halide Perovskite Solar Cells Fabricated under Air Ambient Conditions

Stability of 2D and quasi-2D perovskite materials and devices

Structure and Optical Properties of Cs2TiBrxI6−x

Study On Stability Of Structure And Properties Of Tiopc/San Photoconductive Composites

Stability Improvement of Tin‐Based Halide Perovskite by Precursor‐Solution Regulation with Dual‐Functional Reagents

Thermal stability study of transition metal perovskite sulfides

In situ high temperature X-ray diffraction studies of mixed ionic and electronic conducting perovskite-type membranes

Exploring High-Performance All-Inorganic perovskite materials for Next-Generation photovoltaic Applications: A theoretical study on Cs 2 TlBiX 6 (X = Cl, Br, I)

Halogen engineering of 2D/3D tin halide perovskite for enhanced structural stability

Robust Stability of Efficient Lead-Free Formamidinium Tin Iodide Perovskite Solar Cells Realized by Structural Regulation

Superstable Cs x SnBr x +2 @CsBr Nanocrystals with Over 1200 h of Half-Value PLQY in Air

STUDY ON STABILITY OF STRUCTURE AND PROPERTIES OF TIOPC／SAN PHOTOCONDUCTIVE COMPOSITES

Hybrid Inorganic Electron-Transporting Layer Coupled with a Halogen-Resistant Electrode in CsPbI2Br-Based Perovskite Solar Cells to Achieve Robust Long-Term Stability.

Atomic-Scale Insights into Surface Instability in Halide Perovskites