Abstract:The key to the practical application of organometal–halide crystals perovskite solar cells (PSCs) is to achieve thermal stability through robust encapsulation. This paper presents a method to significantly extend the thermal stability lifetime of perovskite solar cells to over 5000 h at 85 °C by demonstrating an optimal combination of encapsulation methods and perovskite composition for carbon-based multiporous-layered-electrode (MPLE)-PSCs. We fabricated four types of MPLE-PSCs using two encapsulation structures (over- and side-sealing with thermoplastic resin films) and two perovskite compositions ((5-AVA)x(methylammonium (MA))1−xPbI3 and (formamidinium (FA))0.9Cs0.1PbI3), and analyzed the 85 °C thermal stability followed by the ISOS-D-2 protocol. Without encapsulation, FA0.9Cs0.1PbI3 exhibited higher thermal stability than (5-AVA)x(MA)1−xPbI3. However, encapsulation reversed the phenomenon (that of (5-AVA)x(MA)1−xPbI3 became stronger). The combination of the (5-AVA)x(MA)1−xPbI3 perovskite absorber and over-sealing encapsulation effectively suppressed the thermal degradation, resulting in a PCE value of 91.2% of the initial value after 5072 h. On the other hand, another combination (side-sealing on (5-AVA)x(MA)1−xPbI3 and over- and side-sealing on FA0.9Cs0.1PbI3) resulted in decreased stability. The FACs-based perovskite was decomposed from these degradation mechanisms by the condensation reaction between FA and carbon. For side-sealing, the space between the cell and the encapsulant was estimated to contain approximately 1,260,000 times more H2O than in over-sealing, which catalyzed the degradation of the perovskite crystals. Our results demonstrate that MA-based PSCs, which are generally considered to be thermally sensitive, can significantly extend their thermal stability after proper encapsulation. Therefore, we emphasize that finding the appropriate combination of encapsulation technique and perovskite composition is quite important to achieve further device stability.

Thermal Stability Analysis of Formamidinium–Cesium‐Based Lead Halide Perovskite Solar Cells Fabricated under Air Ambient Conditions

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites

Stable Cesium Formamidinium Lead Halide Perovskites: A Comparison of Photophysics and Phase Purity in Thin Films and Single Crystals

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

Optimizing the Light-Humidity Stability of Formamidinium Halide Perovskites Through Intermediate Phase and Strain Stress Adjustment

Danger in the Dark: Stability of Perovskite Solar Cells with Varied Stoichiometries and Morphologies Stressed at Various Conditions

Enhancement of thermal stability for perovskite solar cells through cesium doping

The Impacts and Origins of A-site Instability in Formamidinium-Cesium Lead Iodide Perovskite Solar Cells Under Extended Operation

A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells

Cs0.15FA0.85PbI3/CsxFA1 -Xpbi3 Core/Shell Heterostructure for Highly Stable and Efficient Perovskite Solar Cells

Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Triple-cation mixed-halide perovskites: towards efficient, annealing-free and air-stable solar cells enabled by Pb(SCN)2 additive

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

Stability of perovskite solar cells: issues and prospects

HIGHLY STABLE PEROVSKITE FILM WITH IONIC LIQUID ADDITIVES FOR AMBIENT AIR DEPOSITION

Stable and Efficient Methylammonium‐, Cesium‐, and Bromide‐Free Perovskite Solar Cells by In‐Situ Interlayer Formation

Enhancing Thermal Stability of Perovskite Solar Cells through Thermal Transition and Thin Film Crystallization Engineering of Polymeric Hole Transport Layers

Stable Formamidinium‐Based Perovskite Solar Cells Via in Situ Grain Encapsulation

Metastable interphase induced pre-strain compensation enables efficient and stable perovskite solar cells

Thermal Stability of Encapsulated Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells Extended to Over 5000 h at 85 °C