Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted tremendous attentions in the photovoltaic field these days in view of their outstanding stability, especially thermal stability. However, the bromide-rich perovskite, such as CsPbBr3, always suffer from a low phase-purity and poor morphology synthesized by traditional two-step deposition route. Herein, we demonstrate a facile multistep spin-coating strategy to fabricate high-quality CsPbBr3 films on the low-temperature processed compact TiO2 (c-TiO2) electron transport layer (ETL) of the carbon-based PSCs. As-prepared films exhibit more homogeneous with higher CsPbBr3-phase purity and larger average grain sizes up to 1 mu m, compared to those prepared through traditional two-step deposition process. The champion power conversion efficiency (PCE) of the planar CsPbBr3 PSC is boosted from 7.05% to 8.12%, getting an increase by 15.2%, due to the increased crystallinity and light-harvesting ability as well as reduced trap states of the CsPbBr3 film. To further enhance the device performance, a SnO2 thin layer with much higher carrier mobility than TiO2 is introduced to passivate the c-TiO2 ETL. It is found that the SnO2 layer can not only improve the surface morphology of the ETL, but also reduce the current shunting pathways in the c-TiO2. The TiO2/SnO2 bilayered ETL possesses a superior electron extraction capability, beneficial to the charge transport and suppression of the interfacial trap-assisted recombination. The best-performing TiO2/SnO2-based CsPbBr3 PSC delivers an excellent fill factor of 0.817 and a high PCE of 8.79%, which is the highest efficiency for planar CsPbBr3 PSCs reported to date. More importantly, the unencapsulated all-inorganic PSCs show a promising humidity and thermal stability with no decline in efficiency when stored in ambient air at room temperature (25 degrees C) for over 1000 h and 60 degrees C for one month, respectively. Our work pave the ways for practical applications of cost-effective, highly efficient and stable all-inorganic PSCs.

Hybrid Inorganic Electron-Transporting Layer Coupled with a Halogen-Resistant Electrode in CsPbI2Br-Based Perovskite Solar Cells to Achieve Robust Long-Term Stability.

All-Inorganic Perovskite Solar Cells Based on CsPbIBr 2 and Metal Oxide Transport Layers with Improved Stability.

Strategic Improvement of the Long-Term Stability of Perovskite Materials and Perovskite Solar Cells

All-Inorganic Perovskite Solar Cells Based on CsPbIBr<sub>2</sub> and Metal Oxide Transport Layers with Improved Stability

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

Carbon-Based Cspbbr3 Perovskite Solar Cells: All-Ambient Processes and High Thermal Stability

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

High-performance Carbon Electrode-Based CsPbI2Br Inorganic Perovskite Solar Cell Based on Poly(3-Hexylthiophene)-carbon Nanotubes Composite Hole-Transporting Layer.

Long-term stability in perovskite solar cells through atomic layer deposition of tin oxide

Using 4‐chlorobenzoic Acid Layer Toward Stable and Low‐Cost CsPbI2Br Perovskite Solar Cells

Highly stable all-inorganic CsPbBr3 perovskite solar cells based on pulsed laser deposition

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells

Highly stable all-inorganic CsPbBr<sub>3</sub> perovskite solar cells based on pulsed laser deposition

Highly enhanced long time stability of perovskite solar cells by involving a hydrophobic hole modification layer

Boosting the Efficiency of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells by a Modified Multistep Spin-Coating Technique and Interface Engineering

Precise Nucleation Regulation and Defect Passivation for Highly Efficient and Stable Carbon-Based CsPbI2Br Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells Through E-Beam Preparation of Cerium Doped TiO2 Electron Transport Layer, Ultraviolet Conversion Layer CsPbBr3 and the Encapsulation Layer Al2O3

Improving the stability and scalability of all-inorganic inverted CsPbI<sub>2</sub>Br perovskite solar cell

Improved Air Stability for High-Performance FACsPbI3 Perovskite Solar Cells Via Bonding Engineering.

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells