Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted tremendous attentions in the photovoltaic field these days in view of their outstanding stability, especially thermal stability. However, the bromide-rich perovskite, such as CsPbBr3, always suffer from a low phase-purity and poor morphology synthesized by traditional two-step deposition route. Herein, we demonstrate a facile multistep spin-coating strategy to fabricate high-quality CsPbBr3 films on the low-temperature processed compact TiO2 (c-TiO2) electron transport layer (ETL) of the carbon-based PSCs. As-prepared films exhibit more homogeneous with higher CsPbBr3-phase purity and larger average grain sizes up to 1 mu m, compared to those prepared through traditional two-step deposition process. The champion power conversion efficiency (PCE) of the planar CsPbBr3 PSC is boosted from 7.05% to 8.12%, getting an increase by 15.2%, due to the increased crystallinity and light-harvesting ability as well as reduced trap states of the CsPbBr3 film. To further enhance the device performance, a SnO2 thin layer with much higher carrier mobility than TiO2 is introduced to passivate the c-TiO2 ETL. It is found that the SnO2 layer can not only improve the surface morphology of the ETL, but also reduce the current shunting pathways in the c-TiO2. The TiO2/SnO2 bilayered ETL possesses a superior electron extraction capability, beneficial to the charge transport and suppression of the interfacial trap-assisted recombination. The best-performing TiO2/SnO2-based CsPbBr3 PSC delivers an excellent fill factor of 0.817 and a high PCE of 8.79%, which is the highest efficiency for planar CsPbBr3 PSCs reported to date. More importantly, the unencapsulated all-inorganic PSCs show a promising humidity and thermal stability with no decline in efficiency when stored in ambient air at room temperature (25 degrees C) for over 1000 h and 60 degrees C for one month, respectively. Our work pave the ways for practical applications of cost-effective, highly efficient and stable all-inorganic PSCs.

Improving the stability and scalability of all-inorganic inverted CsPbI<sub>2</sub>Br perovskite solar cell

Improving the stability and scalability of all-inorganic inverted CsPbI2Br perovskite solar cell

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

All-Inorganic Perovskite Solar Cells Based on CsPbIBr<sub>2</sub> and Metal Oxide Transport Layers with Improved Stability

All-Inorganic Perovskite Solar Cells Based on CsPbIBr 2 and Metal Oxide Transport Layers with Improved Stability.

Boosting the Efficiency of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells by a Modified Multistep Spin-Coating Technique and Interface Engineering

Optimization of Inverted All-Inorganic CsPbI3 and CsPbI2Br Perovskite Solar Cells by SCAPS-1D Simulation

One‐Step Construction of a Perovskite/TiO2 Heterojunction toward Highly Stable Inverted All‐Layer‐Inorganic CsPbI2Br Perovskite Solar Cells with 17.1% Efficiency

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Inorganic‐Derived 0D Perovskite Induced Surface Lattice Arrangement for Efficient and Stable All‐Inorganic Perovskite Solar Cells

Hybrid Inorganic Electron-Transporting Layer Coupled with a Halogen-Resistant Electrode in CsPbI2Br-Based Perovskite Solar Cells to Achieve Robust Long-Term Stability.

Highly stable all-inorganic CsPbBr3 perovskite solar cells based on pulsed laser deposition

Highly stable all-inorganic CsPbBr<sub>3</sub> perovskite solar cells based on pulsed laser deposition

Effective Surface Treatment for Efficient and Stable Inverted Inorganic CsPbI2Br Perovskite Solar Cells

Interface Modification for Efficient and Stable Inverted Inorganic Perovskite Solar Cells

Efficient carbon-based CsPbI<sub>2</sub>Br perovskite solar cells using bifunctional polymer modification

Strategies for Improving Efficiency and Stability of Inverted Perovskite Solar Cells.

Improved Interface Contact for Highly Stable All-Inorganic CsPbI2Br Planar Perovskite Solar Cells