Abstract:Perovskite solar cells (PSCs) have become the leader in the field of the third-generation solar cells due to their outstanding photovoltaic performance and low cost. However, the instability stemming from low tolerance to humidity and heat as well as residual solvents and ultraviolet illumination would be challenging for long-term stability. Recently, all inorganic perovskites, especially carbon-based hole-transporting material (HTM) CsPbBr3 perovskite, have attracted increasing attentions because of their enhanced moisture and thermal stability compared to hybrid counterparts. For the CsPbBr3 device, a challenging route to increase power conversion efficiency (PCE) is to take interfacial charge transfer into consideration and reduce interfacial energy-level differences to reduce space charge accumulation and enhance charge extraction. It is known that graphene-based derivatives are promising candidates for interfacial materials due to their excellent electronic properties. For example, graphene quantum dots (GQDs) between perovskite and TiO2 could significantly enhance the performance of PSCs due to dramatically enhanced electron extraction by the inserted GQDs; polyaniline/graphite composites were incorporated into carbon electrode to tailor work function and to improve hole-selectivity of back electrode for enhanced energy level alignment and interfacial hole extraction, leading to a remarkably reduced energy loss and charge recombination. Herein, we developed a strategy to use carbon dots (CDs) with tunable bandgaps and high absorption coefficients for electron extraction performance. The CDs were prepared by exfoliation method from oxidized graphite, and CDs in dimethylformamide solution were spin-coated onto FTO/c-TiO2/m-TiO2 substrate, then a multistep solution-processed method was used to prepare Cs-Pb-Br films with controllable CsPbBr3 phase. Specifically, CsBr/methanol solution (~15 mg mL-1) was spin-coated onto PbBr2 film and then annealed at 250 °C for 5 min, and the processes were repeated for 5 times. The obtained cesium lead bromide films were washed by 2-propanol. Finally, a carbon back-electrode with an average area of 0.09 cm2 was deposited onto the device. We fabricated all-inorganic PSCs with the FTO/c-TiO2/m-TiO2/CDs/CsPbBr3/carbon structure. Arising from the suppressed interfacial charge recombination, the optimal device yielded a PCE up to 10.67% under one sun illumination. These findings suggest that graphene-based derivatives can be used as interfacial modification materials toward high-performance carbon-based HTM-free PSCs.

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

Charge-Transporting-Layer-Free, Vacuum-Free, All-Inorganic CsPbIBr<sub>2</sub>Perovskite Solar Cells Via Dipoles-Adjusted Interface

Boosting the performance of low-temperature processed CsPbI2Br planar perovskite solar cells by interface engineering

Stable and highly efficient all-inorganic CsPbBr3 perovskite solar cells by interface engineering with NiO NCs modification

Efficient Interface Engineering of N, N'-Dicyclohexylcarbodiimide for Stable HTMs-free CsPbBr3 Perovskite Solar Cells with 10.16%-Efficiency

Boosting the Efficiency of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells by a Modified Multistep Spin-Coating Technique and Interface Engineering

Poly(3-hexylthiophene)/zinc phthalocyanine composites for advanced interface engineering of 10.03%-efficiency CsPbBr3 perovskite solar cells

Charge-Transporting-Layer-Free, Vacuum-Free, All-Inorganic Cspbibr(2)Perovskite Solar Cells Via Dipoles-Adjusted Interface

Fluorinated Interfaces for Efficient and Stable Low‐Temperature Carbon‐Based CsPbI2Br Perovskite Solar Cells

Multifunctional Interface Modification Enables Efficient and Stable HTL-Free Carbon-Electroded CsPbI2Br Perovskite Solar Cells

All-Inorganic Perovskite Solar Cells Using Treated Carbon Materials for Effective Charge Extraction

In Situ Constructing Intermediate Energy‐Level Perovskite Transition Layer for 15.03% Efficiency HTL‐Free Carbon‐Based Perovskite Solar Cells with a High Fill Factor of 0.81

Advanced Modification of Perovskite Surfaces for Defect Passivation and Efficient Charge Extraction in Air-Stable CsPbBr3 Perovskite Solar Cells

Targeting the imperfections at the ZnO/CsPbI2Br interface for low-temperature carbon-based perovskite solar cells

Optimized Interface and Recrystallized Grains by CsBr Treatment for Enhanced Photovoltaic Performance of Perovskite Solar Cells

Small Molecules Functionalized Zinc Oxide Interlayers for High Performance Low-Temperature Carbon-Based CsPbI2Br Perovskite Solar Cells

Interface Engineering for Efficient ETL-free Perovskite Solar Cells Via Self-Assembled Bifunctional Monolayer

Boosted Hole Extraction in All-Inorganic CsPbBr3 Perovskite Solar Cells by Interface Engineering Using MoO2/N-doped Carbon Nanospheres Composite

Highly Efficient and Stable Planar CsPbI2Br Perovskite Solar Cell with a New Sensitive-Dopant-free Hole Transport Layer Obtained Via an Effective Surface Passivation

Mitigating interfacial and bulk defects via chlorine modulation for HTL-free all-inorganic CsPbI2Br carbon-based perovskite solar cells with efficiency over 14%