Performance Improvement of All-Inorganic, Hole-Transport-Layer-Free Perovskite Solar Cells Through Dipoles-Adjustion by Polyethyleneimine Incorporating

Gang Lu,Zeyulin Zhang,Fengqin He,Hailong You,Dazheng Chen,Weidong Zhu,Jincheng Zhang,Chunfu Zhang

DOI: https://doi.org/10.1109/led.2021.3058784

IF: 4.8157

2021-04-01

IEEE Electron Device Letters

Abstract:In the increasingly rapid development of perovskite solar cells (PSCs), all-inorganic PSCs, especially Br-rich all-inorganic PSCs, not only inherit the advantages of an adjustable bandgap, and excellent light absorption, but also has superior stability. To find a simple-process and low-cost way to increase perovskite performance, we try to adjust the conduction band of CsPbIBr2 with the help of dipoles induced by PEI incorporating. Furthermore, we use carbon as the negative electrode to abandon the noble metal and hole transport layer (HTL). Finally, the solar cells with the structure of fluorine-doped tin oxide (FTO)/TiO2/CsPbIBr2/Carbon are prepared. The ${V} _{textit {oc}}$ and FF of the carbon-based, HTL-free and all-inorganic PSCs with polyethyleneimine (PEI) incorporating have an obvious improvement, and the champion device can get an efficiency of 7.5% with peak ${V} _{textit {oc}}$ of 1.2 V and maximum FF of 65%, which is far beyond the one without PEI incorporating. Our work hopes to give an effective method to produce a simple, cost-effective design for PSCs.

engineering, electrical & electronic

What problem does this paper attempt to address?

This paper aims to solve the problem of improving the performance of all - inorganic perovskite solar cells (PSCs), especially in terms of increasing the open - circuit voltage ($V_{oc}$) and fill factor (FF). Specifically, the researchers try to adjust the conduction band of CsPbIBr$_2$ by introducing polyethyleneimine (PEI) to reduce the recombination of photoelectrons and holes, thereby improving the overall performance of the device. In addition, this study abandons the traditional expensive metal electrodes and hole - transport layer (HTL) and uses carbon as the negative electrode material, simplifying the preparation process and reducing the cost. Finally, the experimental results show that the efficiency of the all - inorganic, HTL - free carbon - based perovskite solar cell containing PEI reaches 7.5%, the peak open - circuit voltage is 1.2 V, and the maximum fill factor is 65%, which is significantly better than the control group without PEI added. This achievement provides an effective method for producing simple and cost - effective perovskite solar cells.

Performance Improvement of All-Inorganic, Hole-Transport-Layer-Free Perovskite Solar Cells Through Dipoles-Adjustion by Polyethyleneimine Incorporating

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Additive Engineering by Dicyandiamide for High-Performance Carbon-based Inorganic Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Boosting the performance of low-temperature processed CsPbI2Br planar perovskite solar cells by interface engineering

CsPbI3 Based All‐Inorganic Perovskite Solar Cells: Further Performance Enhancement of the Electron Transport Layer‐Free Structure from Device Simulation

Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO2

Managing Defects Density and Interfacial Strain via Underlayer Engineering for Inverted CsPbI 2 Br Perovskite Solar Cells with All‐Layer Dopant‐Free

Photovoltaic Performance Enhancement of All‐Inorganic CsPbBr3 Perovskite Solar Cells Using In2S3 As Electron Transport Layer Via Facile Reflux‐Condensation Process

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

Highly Stable and Efficient Perovskite Solar Cells with 22.0% Efficiency Based on Inorganic–Organic Dopant‐Free Double Hole Transporting Layers

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells

Interlayer Modification Using Phenylethylamine Tetrafluoroborate for Highly Effective Perovskite Solar Cells

Performance Enhancement of Hole Transport Layer-Free Carbon-Based CsPbIBr2 Solar Cells through the Application of Perovskite Quantum Dots

Lithium Fluoride Assisted Preparation of High‐performance All‐Inorganic CsPbI3 Perovskite Solar Cells

High-performance carbon-based CsPbI2Br perovskite solar cells via small molecule modification

Defect‐Engineering‐Enabled High‐Efficiency All‐Inorganic Perovskite Solar Cells

Indium-Doped CsPbI2.5Br0.5 with a Tunable Band Structure and Improved Crystallinity for Thermo-Stable All-Inorganic Perovskite Solar Cells