Thermal stability study of transition metal perovskite sulfides

Shanyuan Niu,JoAnna Milam-Guerrero,Yucheng Zhou,Kevin Ye,Boyang Zhao,Brent C. Melot,Jayakanth Ravichandran

DOI: https://doi.org/10.1557/jmr.2018.419

IF: 2.7

2018-11-15

Journal of Materials Research

Abstract:Abstract

materials science, multidisciplinary

What problem does this paper attempt to address?

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Jianming Yang,Xianjie Liu,Yuexing Zhang,Xuerong Zheng,Xiaoxiao He,Han Wang,Fangyu Yue,Slawomir Braun,Jinquan Chen,Jianhua Xu,Yanqing Li,Yizheng Jin,Jianxin Tang,Chungang Duan,Mats Fahlman,Qinye Bao

DOI: https://doi.org/10.1016/j.nanoen.2018.10.011

IF: 17.6

2018-01-01

Nano Energy

Abstract:The triple-cation mixed halide perovskite Cs-0.05(MA(0.17)FA(0.83))(0.95)Pb(I0.83Br0.17)(3) emerges as one of the most promising candidates for photovoltaics due to superior optoelectronic properties, but the thermal stability is still a major challenge for the viability of perovskite solar cells towards commercialization. Herein, we firstly explore the thermal response of the photovoltaic performances to access device physical changes. It is shown that the efficiency loss originates from decreased charge mobility, increased trap density and generation of PbI2 charge recombination centers near the interface. In-depth analysis of evolutions in morphology, chemical composition, dynamic and electronic structure of the perovskite layer at the nanometer scales indicates that it is initial dangling bonds and vacancies on the imperfect surfaces decrease the activation energy and cause the perovskite decomposition in a layer-by-layer pathway sequentially from the film surface to bulk. Based on the results, a strategy of surface passivation to improve the thermal stability is demonstrated and discussed. This work for the first time provides insights into the physical and chemical change of such triple-cation perovskite and indicates that more effort should be invested in surface treatment for enhancing perovskite device stability.
Temperature Gradient-Induced Instability of Perovskite Via Ion Transport

Xinwei Wang,Hong Liu,Feng Zhou,Jeremy Dahan,Xin Wang,Zhengping Li,Wenzhong Shen

DOI: https://doi.org/10.1021/acsami.7b17798

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Perovskite has been known as a promising novel material for photovoltaics and other fields because of its excellent opto-electric properties and convenient fabrication. However, its stability has been a widely known haunting factor that has severely deteriorated its application in reality. In this work, it has been discovered for the first time that perovskite can become significantly chemically unstable with the existence of a temperature gradient in the system, even at temperature far below its thermal decomposition condition. A study of the detailed mechanism has revealed that the existence of a temperature gradient could induce a mass transport process of extrinsic ionic species into the perovskite layer, which enhances its decomposition process. Moreover, this instability could be effectively suppressed with a reduced temperature gradient by simple structural modification of the device. Further experiments have proved the existence of this phenomenon in different perovskites with various mainstream substrates, indicating the universality of this phenomenon in many previous studies and future research. Hopefully, this work may bring deeper understanding of its formation mechanisms and facilitate the general development of perovskite toward its real application.
Efficient and Stable of Perovskite Solar Cells

Qi Jiang,Xingwang Zhang,Jingbi You

DOI: https://doi.org/10.1364/acpc.2016.ath2i.1

2016-01-01

Abstract:Stability is the critical issue in perovskite solar cell, one possible reason of degradation come from organic transport layers which we have used. Recently, we have adopted all metal oxide layers as the charge transport layers, which has significantly improved the device stability. The improvement come from the avoid the interfacial degradation and also the reaction between perovskite and metal electrode, such as Ag and Al. We showed the device with the efficiency of 16.1% and good stability in ambient air.
Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites

Jonas A Schwenzer,Tim Hellmann,Bahram Abdollahi Nejand,Hang Hu,Tobias Abzieher,Fabian Schackmar,Ihteaz M Hossain,Paul Fassl,Thomas Mayer,Wolfram Jaegermann,Uli Lemmer,Ulrich W Paetzold

DOI: https://doi.org/10.1021/acsami.1c01547

2021-04-07

Abstract:One of the great challenges of hybrid organic-inorganic perovskite photovoltaics is the material's stability at elevated temperatures. Over the past years, significant progress has been achieved in the field by compositional engineering of perovskite semiconductors, e.g., using multiple-cation perovskites. However, given the large variety of device architectures and nonstandardized measurement protocols, a conclusive comparison of the intrinsic thermal stability of different perovskite compositions is missing. In this work, we systematically investigate the role of cation composition on the thermal stability of perovskite thin films. The cations in focus of this study are methylammonium (MA), formamidinium (FA), cesium, and the most common mixtures thereof. We compare the thermal degradation of these perovskite thin films in terms of decomposition, optical losses, and optoelectronic changes when stressed at 85 °C for a prolonged time. Finally, we demonstrate the effect of thermal stress on perovskite thin films with respect to their performance in solar cells. We show that all investigated perovskite thin films show signs of degradation under thermal stress, though the decomposition is more pronounced in methylammonium-based perovskite thin films, whereas the stoichiometry in methylammonium-free formamidinium lead iodide (FAPbI3) and formamidinium cesium lead iodide (FACsPbI3) thin films is much more stable. We identify compositions of formamidinium and cesium to result in the most stable perovskite compositions with respect to thermal stress, demonstrating remarkable stability with no decline in power conversion efficiency when stressed at 85 °C for 1000 h. Thereby, our study contributes to the ongoing quest of identifying the most stable perovskite compositions for commercial application.
Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning

Yicheng Zhao,Jiyun Zhang,Zhengwei Xu,Shijing Sun,Stefan Langner,Noor Titan Putri Hartono,Thomas Heumueller,Yi Hou,Jack Elia,Ning Li,Gebhard J. Matt,Xiaoyan Du,Wei Meng,Andres Osvet,Kaicheng Zhang,Tobias Stubhan,Yexin Feng,Jens Hauch,Edward H. Sargent,Tonio Buonassisi,Christoph J. Brabec

DOI: https://doi.org/10.1038/s41467-021-22472-x

IF: 16.6

2021-04-13

Nature Communications

Abstract:Abstract Stability of perovskite-based photovoltaics remains a topic requiring further attention. Cation engineering influences perovskite stability, with the present-day understanding of the impact of cations based on accelerated ageing tests at higher-than-operating temperatures (e.g. 140°C). By coupling high-throughput experimentation with machine learning, we discover a weak correlation between high/low-temperature stability with a stability-reversal behavior. At high ageing temperatures, increasing organic cation (e.g. methylammonium) or decreasing inorganic cation (e.g. cesium) in multi-cation perovskites has detrimental impact on photo/thermal-stability; but below 100°C, the impact is reversed. The underlying mechanism is revealed by calculating the kinetic activation energy in perovskite decomposition. We further identify that incorporating at least 10 mol.% MA and up to 5 mol.% Cs/Rb to maximize the device stability at device-operating temperature (<100°C). We close by demonstrating the methylammonium-containing perovskite solar cells showing negligible efficiency loss compared to its initial efficiency after 1800 hours of working under illumination at 30°C.

multidisciplinary sciences
Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Xin-Feng Diao,Yan-lin Tang,Tian-yu Tang,Quan Xie,Kun Xiang,Gao-fu Liu

DOI: https://doi.org/10.1080/00268976.2019.1665200

2019-09-12

Molecular Physics

Abstract:In order to better understand and elucidate the structural stability of perovskite materials, the lattice parameters and tolerance factors of three crystal structures of perovskite materials are calculated based on the first principle of density functional theory. We find that the perovskite crystal structures are relatively stable and is consistent with the experimental facts as the tolerance factor 0.81 < T < 1.11. The elastic modulus of three crystal structures of MAPbI3, FAPbI3 and the elastic modulus of FA0.75Cs0.25Sn0.5PB0.5I3 are studied. By Voigt-Reuss-Hill approximation, the elastic properties such as bulk modulus, shear modulus, Young's modulus and Poisson's ratio are obtained. From the elastic modulus Cij, we can find that the other six kinds of crystal structures are relatively stable except for the orthogonal structure of MAPbI3 (c). The ductility and brittle toughness of the material are also discussed by B/G and Poisson's ratio. It is found that MAPbI3 (a) is the hardest and FAPBI3 (a) the weakest. Form the three-dimensional surface view of Young's modulus it is found that their dependence in three-dimensional direction is spherical for an isotropic system. The degree of deviation of the Young's modulus sphere reflects the anisotropy of crystal structures. The degree of elastic anisotropy of organic–inorganic perovskite materials follows the order of FAPbI3(c) > MAPbI3(a) > FA0.75 Cs0.25 Sn0.5Pb0.5I3 > FAPbI3(a) > MAPbI3(b) > MAPbI3(c) >FAPbI3(b). Furthermore, by the adsorption energies and density of states (DOS) of these seven crystals for water molecules, the reasons why perovskite materials are easily denatured in high humidity environment were explored. The results show that perovskite materials are easy to denaturate in high humidity environment.

chemistry, physical,physics, atomic, molecular & chemical
Study on the properties of perovskite materials under light and different temperatures and electric fields based on DFT

Xin-Feng Diao,Yan-lin Tang,De-Yong Xiong,Ping-Rui Wang,Li-ke Gao,Tian-yu Tang,Xiao-Nan Wei,Hai-Rong Zhang,Xu-Pu wu,Shen-Tong Ji

DOI: https://doi.org/10.1039/d0ra02841j

IF: 4.036

2020-01-01

RSC Advances

Abstract:The photoelectric conversion efficiency of perovskite solar cells has improved rapidly, but their stability is poor, which is an important factor that restricts their commercial production.

chemistry, multidisciplinary
Inhomogeneous Degradation in Metal Halide Perovskites

Rong Yang,Li Zhang,Yu Cao,Yanfeng Miao,You Ke,Yingqiang Wei,Qiang Guo,Ying Wang,Zhaohua Rong,Nana Wang,Renzhi Li,Jianpu Wang,Wei Huang,Feng Gao

DOI: https://doi.org/10.1063/1.4999630

IF: 4

2017-01-01

Applied Physics Letters

Abstract:Although the rapid development of organic-inorganic metal halide perovskite solar cells has led to certified power conversion efficiencies of above 20%, their poor stability remains a major challenge, preventing their practical commercialization. In this paper, we investigate the intrinsic origin of the poor stability in perovskite solar cells by using a confocal fluorescence microscope. We find that the degradation of perovskite films starts from grain boundaries and gradually extend to the center of the grains. Firmly based on our findings, we further demonstrate that the device stability can be significantly enhanced by increasing the grain size of perovskite crystals. Our results have important implications to further enhance the stability of optoelectronic devices based on metal halide perovskites.
Metal Halide Perovskites: Stability and Sensing-Ability

Zhaohua Zhu,Qian Sun,Zhipeng Zhang,Jie Dai,Guichuan Xing,Shaozhou Li,Xiao Huang,Wei Huang

DOI: https://doi.org/10.1039/c8tc03164a

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:Metal halide perovskites have been intensively studied over the past years due to their attractive electronic, optical and optoelectronic properties. In spite of the phenomenally high solar-conversion efficiency achieved with perovskites, their adverse instability remains the key obstacle restricting their wider applications. These ionic crystals can be affected by many factors, such as varied temperatures, humid air, polar solvents, and electron-withdrawing/donating gases. However, under certain controlled conditions, changes in perovskite structures/compositions via, for example, phase transitions, hydration/dehydration, gas adsorption/desorption, and ion intercalation/decalation, can all be reversed, suggesting their great potential for sensing applications. In this contribution, we first overview recent investigations and mechanistic studies on the stability of metal halide perovskites under various environmental conditions. Then, we highlight the recent attempts to apply perovskites for the detection of temperature change, humidity, gases, solvents and ions. Finally, we discuss current challenges and future opportunities for developing sensing systems based on metal halide perovskites.
Stability Investigation of the Titanium-Based Eco-Friendly Perovskite-Like Antifluorite Cs2TiBr6

Yizhou He,Xiaowei Guo,Huiyi Zheng,Liyifei Xv,Shaorong Li

DOI: https://doi.org/10.1039/d2tc00729k

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:The air, oxygen, moisture, thermal, and illumination stability of Cs2TiBr6are investigated.
Improved photostability of metal halide perovskites by microstructure modulation for photovoltaic application

Cong-Cong Zhang,Shuai Yuan,Kai-Li Wang,Zhao-Kui Wang,Hiroyuki Okada

DOI: https://doi.org/10.1016/j.orgel.2021.106380

IF: 3.868

2022-02-01

Organic Electronics

Abstract:Despite the excellent optoelectronic properties of metal halide perovskites in a photovoltaic device, they suffer from serious and poor photostability in real-scenario operating conditions during test and storage. As common, perovskite undergoes complex variation under successive light radiation, the most conspicuous effect is the photo-induced ion migration and phase segregation, which happens the quickest, dramatically influences build-in field, and hence remarkable poor photostability of photovoltaic devices. Herein, we adopted thiourea as an intermediate regulator to slow down the nucleation process of perovskite and form larger grain sizes, thus, fewer grain boundaries, namely fewer migration channels, decrease the ion migration possibility under illuminance and strengthen the photostability of perovskite films. Experiment results showed that such a strategy improves device reproducibility and photostability under continuous scanning and prolongs device lifetime stored at air condition.

materials science, multidisciplinary,physics, applied
Computational study of stability, photovoltaic, and thermoelectric properties of new inorganic lead-free halide perovskites

Mohamed Agouri,H Ouhenou,A Waqdim,A Zaghrane,E Darkaoui,A Abbassi,Bouzid Manaut,Souad Taj,M. Driouich

DOI: https://doi.org/10.1209/0295-5075/ad2cb7

2024-02-24

Europhysics Letters

Abstract:Due to their rich and extraordinary properties, halide perovskites have gained attention over time for their applications in thermoelectric and solar cells. Here, several physicalproperties (stability, photovoltaic, and thermoelectric) of inorganic halide perovskites XZnI3(X = Na; K; Rb; Cs) are predicted using the density functional theory (DFT) within the Wien2k code. The optimization of structural parameters have been calculated using PBE-GGA approach. The tolerance factor, Born criteria, phonon dispersion, and negative formation energy show the formation and stability of these studied materials in the ideal cubic structure. Additionally, the modified Becke-Johnson method is applied for optoelectronic and transport properties. All compounds exhibit the nature of indirect band gap semiconductors with better absorption in the visible and ultraviolet regions ( ). The transport properties present high electrical conductivity, large Seebeck coefficient, and good (PF, ZT) factors for all these materials. Finally, all these properties of inorganic halide perovskites open up new possibilities for efficient applications in thermoelectric and solar cells.
Efficient Thermal Conductance in Organometallic Perovskite CH3NH3PbI3 Films

Qi Chen,Chunfeng Zhang,Mengya Zhu,Shenghua Liu,Mark E. Siemens,Shuai Gu,Jia Zhu,Jiancang Shen,Xinglong Wu,Chen Liao,Jiayu Zhang,Xiaoyong Wang,Min Xiao

DOI: https://doi.org/10.1063/1.4942779

2016-01-22

Abstract:Perovskite-based optoelectronic devices have shown great promise for solar conversion and other optoelectronic applications, but their long-term performance instability is regarded as a major obstacle to their widespread deployment. Previous works have shown that the ultralow thermal conductivity and inefficient heat spreading might put an intrinsic limit on the lifetime of perovskite devices. Here, we report the observation of a remarkably efficient thermal conductance, with conductivity of 11.2 +/- 0.8 W m^-1 K^-1 at room temperature, in densely-packed perovskite CH3NH3PbI3 films, via noncontact time-domain thermal reflectance measurements. The temperature-dependent experiments suggest the important roles of organic cations and structural phase transitions, which are further confirmed by temperature-dependent Raman spectra. The thermal conductivity at room temperature observed here is over one order of magnitude larger than that in the early report, suggesting that perovskite device performance will not be limited by thermal stability.

Materials Science
Stability of 2D and quasi-2D perovskite materials and devices

Tik Lun Leung,Ishaq Ahmad,Ali Ashger Syed,Alan Man Ching Ng,Jasminka Popović,Aleksandra B. Djurišić

DOI: https://doi.org/10.1038/s43246-022-00285-9

2022-09-06

Communications Materials

Abstract:Different 2D and quasi-2D perovskite materials have demonstrated significant improvements in the device stability compared to 3D perovskites due to their increased hydrophobicity and suppressed ion migration. However, fundamental investigations of these materials have been scarce and consequently detailed understanding of the processes responsible for experimental phenomena are often lacking despite huge interest in these materials. Even more importantly, there have been a limited number of structure-property studies for different material compositions, and research is generally by trial and error rather than by design. Here we discuss different stability issues in these materials and identify questions which need to be answered to design materials with further stability improvements.
Atomistic and Electronic Origin of Phase Instability of Metal Halide Perovskites

Junke Jiang,Feng Liu,Ionut Tranca,Qing Shen,Shuxia Tao

DOI: https://doi.org/10.1021/acsaem.0c00791

IF: 6.4

2020-11-23

ACS Applied Energy Materials

Abstract:The excellent optoelectronic properties of metal halide perovskites (MHPs) have attracted extensive scientific interest and boosted their application in optoelectronic devices. Despite their attractive optoelectronic properties, their poor stability under ambient conditions remains the major challenge, hindering their large-scale practical applications. In particular, some MHPs undergo spontaneous phase transitions from perovskites to nonperovskites. Compositional engineering via mixing cations or anions has been widely reported to be effective in suppressing such unwanted phase transitions. However, the atomistic and electronic origins of the stabilization effect remain unexplored. Here, by using density functional theory calculations, we provide insights for the undesired phase transition of pristine perovskites (FAPbI3, CsPbI3, and CsSnI3) and reveal the mechanisms of the improved phase stability of the mixed compounds [CsxFA1–xPbI3, CsSnyPb1–yI3, and CsSn(BrzI1–z)3]. We identify that the phase transition is correlated with the relative strength of the M–X bonds as well as that of the hydrogen bonds (for hybrid compositions) in perovskite and nonperovskite phases. The phase transition can be suppressed by mixing ions, giving rise to either an increased bond strength for the perovskite or a decreased bond strength in their nonperovskite counterparts, or suppressed vacancy defect formation for Sn–Pb mixed perovskites. Our results present a comprehensive understanding of the mechanisms for the phase instability of MHPs and provide design rules for engineering phase-stable perovskite compositions.This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Intercalating-Organic-Cation-Induced Stability Bowing in Quasi-2D Metal-Halide Perovskites

Jiyun Zhang,Stefan Langner,Jianchang Wu,Christian Kupfer,Larry Lüer,Wei Meng,Baolin Zhao,Chao Liu,Manuel Daum,Andres Osvet,Ning Li,Marcus Halik,Tobias Stubhan,Yicheng Zhao,Jens A. Hauch,Christoph J. Brabec,Larry Lüer

DOI: https://doi.org/10.1021/acsenergylett.1c02081

IF: 22

2021-12-02

ACS Energy Letters

Abstract:Quasi-2D metal-halide perovskites with Ruddlesden–Popper structures have shown promising stability due to the protective effects of the intercalating organic cations. However, a systematic study of the effect of intercalating organic cations on stability has rarely been reported. Here we use a high-throughput-robot platform to fabricate over 300 perovskite films and study the effect of cations and their concentrations on the thermal stability of perovskite films. We find that approximately 20–25 mol % of intercalating organic cations into MAPbI3 (nominal n = 4/5) can maximize the film stability, while higher/lower concentrations lead to inferior stability, which is termed stability bowing in analogy to band-gap bowing. A model with two competitive effects of the intercalating organic cation (better protection vs more defects) is proposed to rationalize this behavior. We anticipate this work to provide new insights into the stability of quasi-2D perovskites.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
In Situ and Operando Characterization Techniques in Stability Study of Perovskite-Based Devices

Bingchen He,Chenyue Wang,Jielei Li,Zhenhuang Su,Guichuan Xing,Xingyu Gao,Shi Chen

DOI: https://doi.org/10.3390/nano13131983

IF: 5.3

2023-06-30

Nanomaterials

Abstract:Metal halide perovskite materials have demonstrated significant potential in various optoelectronic applications, such as photovoltaics, light emitting diodes, photodetectors, and lasers. However, the stability issues of perovskite materials continue to impede their widespread use. Many studies have attempted to understand the complex degradation mechanism and dynamics of these materials. Among them, in situ and/or operando approaches have provided remarkable insights into the degradation process by enabling precise control of degradation parameters and real-time monitoring. In this review, we focus on these studies utilizing in situ and operando approaches and demonstrate how these techniques have contributed to reveal degradation details, including structural, compositional, morphological, and other changes. We explore why these two approaches are necessary in the study of perovskite degradation and how they can be achieved by upgrading the corresponding ex situ techniques. With recent stability improvements of halide perovskite using various methods (compositional engineering, surface engineering, and structural engineering), the degradation of halide perovskite materials is greatly retarded. However, these improvements may turn into new challenges during the investigation into the retarded degradation process. Therefore, we also highlight the importance of enhancing the sensitivity and probing range of current in situ and operando approaches to address this issue. Finally, we identify the challenges and future directions of in situ and operando approaches in the stability research of halide perovskites. We believe that the advancement of in situ and operando techniques will be crucial in supporting the journey toward enhanced perovskite stability.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Highly Stable Cesium Molybdenum Chloride Perovskite Nanocrystals for Photothermal Semihydrogenation Applications

Qingkun Kong,Shuchao Jiang,Zhongyi Wang,Xin Xu,Ruiling Zhang,Guoqing Zhu,Junxia Yang,Peigeng Han,Runze Liu,Feng Hong,Nengchao Luo,Junsheng Chen,Bin Yang

DOI: https://doi.org/10.1021/acsami.4c05157

IF: 9.5

2024-06-26

ACS Applied Materials & Interfaces

Abstract:Metal halide perovskite materials with excellent carrier transport properties have been regarded as a new class of catalysts with great application potential. However, their development is hampered by their instability in polar solvents and high temperatures. Herein, we report a solution-processed Cs(2)MoCl(6) perovskite nanocrystals (NCs) capped with the Mo^(6+), showing high thermostability in polar solvents. Furthermore, the Pd single atoms (PdSA) can be anchored on the surface of...

materials science, multidisciplinary,nanoscience & nanotechnology
Photodecomposition and Thermal Decomposition in Methylammonium Halide Lead Perovskites and Inferred Design Principles to Increase Photovoltaic Device Stability

Emilio J. Juarez-Perez,Luis K. Ono,Maki Maeda,Yan Jiang,Zafer Hawash,Yabing Qi

DOI: https://doi.org/10.1039/c8ta03501f

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Strategies of how to mitigate photodegradation and thermal degradation processes are proposed in this work in order to further improve operational stability in hybrid perovskite solar cells.
Thermal Stability Analysis of Formamidinium–Cesium‐Based Lead Halide Perovskite Solar Cells Fabricated under Air Ambient Conditions

Binita Boro,Snehangshu Mishra,Paulomi Singh,Basudev Lahiri,Shailendra Kumar Varshney,Trilok Singh

DOI: https://doi.org/10.1002/ente.202400034

IF: 4.149

2024-05-21

Energy Technology

Abstract:Effect of compositional tuning of mixed‐cation and mixed‐halide perovskite (FA1−yCsyPb(I0.85Br0.15)3) has been analyzed for structural and thermal stability of the perovskite film. Perovskite film with 10% Cs demonstrates reduced microstrain and enhanced thermal stability. Fabricated device utilizing FA0.9Cs0.1Pb(I0.85Br0.15)3 perovskite and Top‐3 as hole‐transport layer achieves 17.70% efficiency with a promising device shelf‐life time. The instability of perovskite solar cells (PSCs) remains a major bottleneck for their commercialization, with thermal instability posing a major concern, given the inevitable presence of heat in photovoltaic devices. Mixed‐cation/halide perovskites demonstrate enhanced stability and efficiency compared to single‐cation/halide perovskites. Identifying the optimal perovskite composition capable of withstanding high temperatures for longer durations is crucial for the development of thermally stable PSCs. This study provides valuable insights into the optimization of mixed‐cation/halide perovskites to enhance the thermal and structural stability of perovskite films. By systematically varying the Cs content in FA1−yCsyPb(I0.85Br0.15)3 (0

energy & fuels

Thermal stability study of transition metal perovskite sulfides

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Temperature Gradient-Induced Instability of Perovskite Via Ion Transport

Efficient and Stable of Perovskite Solar Cells

Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites

Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning

Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Study on the properties of perovskite materials under light and different temperatures and electric fields based on DFT

Inhomogeneous Degradation in Metal Halide Perovskites

Metal Halide Perovskites: Stability and Sensing-Ability

Stability Investigation of the Titanium-Based Eco-Friendly Perovskite-Like Antifluorite Cs2TiBr6

Improved photostability of metal halide perovskites by microstructure modulation for photovoltaic application

Computational study of stability, photovoltaic, and thermoelectric properties of new inorganic lead-free halide perovskites

Efficient Thermal Conductance in Organometallic Perovskite CH3NH3PbI3 Films

Stability of 2D and quasi-2D perovskite materials and devices

Atomistic and Electronic Origin of Phase Instability of Metal Halide Perovskites

Intercalating-Organic-Cation-Induced Stability Bowing in Quasi-2D Metal-Halide Perovskites

In Situ and Operando Characterization Techniques in Stability Study of Perovskite-Based Devices

Highly Stable Cesium Molybdenum Chloride Perovskite Nanocrystals for Photothermal Semihydrogenation Applications

Photodecomposition and Thermal Decomposition in Methylammonium Halide Lead Perovskites and Inferred Design Principles to Increase Photovoltaic Device Stability

Thermal Stability Analysis of Formamidinium–Cesium‐Based Lead Halide Perovskite Solar Cells Fabricated under Air Ambient Conditions