Abstract:Tin halide perovskite solar cells (PSCs) have attracted great attention in very recent years due to their low toxicity, suitable band gap, and high light absorption coefficient. However, the power conversion efficiency (PCE) and stability of Sn-based PSCs are still much lower than that of their lead-based counterparts. The main reason comes from the Sn2+ ions spontaneously oxidizing into Sn4+ under ambient air conditions. The resulting self-p-type doping of the Sn-based perovskite layer becomes unsuitable and leads to poor photovoltaic performance. Herein, we demonstrate the fabrication of a semiconducting–insulating interface fully covering the formamidinium tin iodide (FASnI3) with a thin layer of poly(methyl methacrylate) (PMMA). The PMMA layer does not only protect FASnI3 from oxygen and moisture but also effectively passivate defect-driven recombination, resulting in improved open-circuit voltage. As a result, devices using a PMMA-FASnI3 layer exhibit a much higher PCE (10.8%) and better stability compared to devices based on pristine FASnI3 (7.7%). Importantly, the PMMA-FASnI3 devices maintain about 80% of their initial efficiency after being stored for 240 h under ambient conditions (25 °C, 60 RH%) without requiring any further encapsulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01422?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01422</a>.XRD; current density–voltage curve; PCE histogram; operation stability curve; UV–vis spectrum and dark current curve (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01422/suppl_file/ae0c01422_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Robust Stability of Efficient Lead-Free Formamidinium Tin Iodide Perovskite Solar Cells Realized by Structural Regulation

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

High-Performance Lead-Free Solar Cells Based on Tin-Halide Perovskite Thin Films Functionalized by a Divalent Organic Cation

Stable and Efficient Tin-Based Perovskite Solar Cell via Semiconducting–Insulating Structure

Numerical Simulation and Optimization of Highly Stable and Efficient Lead-Free Perovskite FA1−xCsxSnI3-Based Solar Cells Using SCAPS

Bi-Linkable Reductive Cation as Molecular Glue for One Year Stable Sn-Based Perovskite Solar Cells

Controlling the Film Structure by Regulating 2D Ruddlesden–Popper Perovskite Formation Enthalpy for Efficient and Stable Tri-Cation Perovskite Solar Cells

Cs0.15FA0.85PbI3/CsxFA1 -Xpbi3 Core/Shell Heterostructure for Highly Stable and Efficient Perovskite Solar Cells

Ligand Orientation-Induced Lattice Robustness for Highly Efficient and Stable Tin-Based Perovskite Solar Cells

Synergistic Trifluoroacetamide Regulating Crystal Orientation and Energy Alignment for Tin-Based Perovskite Solar Cells

Stabilizing Bottom Side of Perovskite via Preburying Cesium Formate toward Efficient and Stable Solar Cells

Optimizing the Light-Humidity Stability of Formamidinium Halide Perovskites Through Intermediate Phase and Strain Stress Adjustment

Hybrid Inorganic Electron-Transporting Layer Coupled with a Halogen-Resistant Electrode in CsPbI2Br-Based Perovskite Solar Cells to Achieve Robust Long-Term Stability.

Danger in the Dark: Stability of Perovskite Solar Cells with Varied Stoichiometries and Morphologies Stressed at Various Conditions

Highly Efficient and Stable FASnI3 Perovskite Solar Cell via Modification with Tetrapotassium Hexacyanoferrate

Long-term stability in perovskite solar cells through atomic layer deposition of tin oxide

The Impacts and Origins of A-site Instability in Formamidinium-Cesium Lead Iodide Perovskite Solar Cells Under Extended Operation

Stability Improvement of Tin‐Based Halide Perovskite by Precursor‐Solution Regulation with Dual‐Functional Reagents

Highly efficient and stable FASnI3 perovskite solar cells with effective interface modulation by PEABr treated low-dimensional perovskite layer.

Addictive-Assisted Construction Of All-Inorganic Cssnibr2 Mesoscopic Perovskite Solar Cells With Superior Thermal Stability Up To 473 K

Highly Stable and Efficient FASnI 3 -Based Perovskite Solar Cells by Introducing Hydrogen Bonding.