Abstract:The effects of an α-Al2O3 nanoparticle filler in the SiC matrix on the mechanical properties and failure mechanism of the unidirectional, laminated carbon fiber-reinforced SiC composites were investigated in this work. First, α-Al2O3 nanoparticles were added to the carbon fiber bundles using a slurry impregnation method, and then the Cf/SiC composite with an α-Al2O3 nanoparticle filler (Cf/SiC-Al2O3) was fabricated using a precursor infiltration and pyrolysis method. The microstructure of the Cf/SiC-Al2O3 composite showed chemical compatibility between the α-Al2O3 and the pyrolysis SiC. The Cf/SiC-Al2O3 composite with a low porosity of ~6.67% achieved a good flexural strength of 629.3 MPa and a good fracture toughness of 25.2 MPa·m1/2. The interlaminar shear strength of the Cf/SiC-Al2O3 composite was 11.7 MPa. The SiC-Al2O3 matrix also presented a considerable Young’s modulus of 138.2 ± 8.66 GPa and hardness of 10.3 ± 1.03 GPa. Further analysis indicated that the good mechanical properties with the addition of an α-Al2O3 filler were not only related to the dense matrix and the improvement of the mechanical properties of the matrix. They also originated from the thermal residual compressive stress in the SiC matrix close to the α-Al2O3 nanoparticles caused by the thermal expansion mismatch, which could reflect and close the cracks in the matrix. The findings of this study provide more methods for designing new composites exhibiting a good performance.

Microstructure and ablation behaviour of a Cf/SiC-Al composite prepared by infiltrating Al alloy into Cf/SiC

Microstructures and Ablation Properties of Al-Si Modified C/C Composites Produced by the Reactive Melt Infiltration Method

Microstructure and ablation behavior of C/C–HfC–SiC composites fabricated by reactive melt infiltration with Hf–Si alloy

Microstructure, Mechanical and Ablation Properties of Transpiration Cooling Applied to C/C-SiC Composite for Novel Anti-ablation Material

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Comparison of Microstructure and Ablation Behavior of Si-Mo-Ti/Al/Zr Infiltrated C/C Composites Prepared at Different Infiltration Temperature

Microstructure and Mechanical Properties of Sic/Al Nanocomposite

Microstructure, Thermophysical, and Ablative Performances of a 3D Needled C/C–SiC Composite

Microstructure and Ablation Properties of a Gradient Cf/C-XSi2-SiC (X = Mo,Ti) Composite Fabricated by Reactive Melt Infiltration

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler

Effects of Ti/Al addition on the microstructures and ablation properties of C f /C–MoSi 2 –SiC composites

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Laser Ablation Resistance and Mechanism of Si-Zr Alloyed Melt Infiltrated C/C-SiC Composite

The Microstructure and Properties of SiC/SiC-based Composites Fabricated by Low-Temperature Melt Infiltration of Al–Si Alloy

Ablation behavior of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration

Microstructure, thermophysical properties, and ablation resistance of C/HfC-ZrC-SiC composites

Processing, microstructure and ablation behavior of C/SiC-Ti3SiC2 composites fabricated by liquid silicon infiltration

A Novel Design of Al-Cr Alloy Surface Sealing for Ablation Resistant C/C-ZrC-SiC Composite

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Effect of Cu addition on the microstructure, thermal physical properties and cyclic ablation of C/C-AlSi composite

Microstructure and Ablation Behavior of SiC Coated C/C–SiC–ZrC Composites Prepared by a Hybrid Infiltration Process