Abstract:Hypoeutectic Al-Mg 2 Si alloys are distinguished as premier structural materials for transportation purposes, celebrated for their superior ductility and exceptional corrosion resistance. Enhancing strength and evaluating castability are critical for broadening their applicability. This study meticulously explores the influence of copper (Cu) on the mechanical attributes and castability of AlMg5.4Si2 alloys through detailed tensile testing and casting experiments utilizing constrained rod casting and spiral molds. Our findings reveal that increasing Cu levels refine grain size and condense the spacing of secondary dendrite arms, although this leads to a diminishing effect on the beneficial modifications introduced by bismuth (Bi). Specifically, the addition of 0.1 wt% Cu elevates the yield strength and ultimate tensile strength by 19 and 31 MPa, respectively. However, when Cu concentration exceeds 0.1 wt%, there is a marked degradation in mechanical properties due to the formation of the agglomerated S-Al 2 CuMg phase. Furthermore, the Cu enrichment escalates the hot tearing sensitivity and diminishes fluidity, predominantly due to an expanded freezing temperature range and an increased propensity for dendritization. The comparisons between experimental castability outcomes, numerical simulations and theoretical benchmarks have validated the predictive potential of these methodologies. These insights afford a nuanced comprehension of the multifaceted impacts of microalloying on the Al-Mg 2 Si cast alloys, and pave the way for compositional refinements in industrial practices. Critically, this research not only underscores the delicate balance required in alloy design, but also opens new pathways for enhancing the performance of transportation materials through strategic microalloying.

Effect of Cu addition on the microstructure, thermal physical properties and cyclic ablation of C/C-AlSi composite

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Effect of Infiltrated Eutectic AlSi on the Microstructure and Properties of C/C Composites

Effects of matrix-alloying-element Cu on the interfacial microstructure of C/Al-Cu composite

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Effect of Cu coating thickness on carbon fiber surface on microstructure and mechanical properties of carbon fiber reinforced aluminum matrix composites

Effect of Cu Content on Microstructure and Properties of Al2o3-Sio2 Fiber Reinforced Aluminum Matrix Composites

Influence of adding Cu element on properties of Al/Al2O3 composite materials

Influence of Cu content on interfacial microstructure of Al2O3-SiO2 fiber reinforced Al matrix composites

Influence of Cu content on interfacial structure and mechanical properties of 3Al2O32SiO2 fiber reinforced Al matrix composites

Microstructure, Mechanical and Ablation Properties of Transpiration Cooling Applied to C/C-SiC Composite for Novel Anti-ablation Material

Effect of preset interfacial ZrB 2 particles on the microstructure and properties of C/C-AlSi composites

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Investigation on the solidification microstructure, microsegregation and mechanical properties of CF/Al-4.5Cu metal matrix composites

Effect of copper coating on interfacial properties, interfacial thermal resistance, microstructure evolution and mechanical properties of aluminum matrix composites

Effect of Ti–Cu alloy's composition on microstructure and performance of carbon fiber reinforced TiC-based composites prepared by alloyed reactive melt infiltration

Enhancement mechanism of carbon fiber on the current-carrying tribological properties of Cf-Al2O3/Cu composites

Physical, mechanical, and ablation properties of Cu–Ti3AlC2 composites with various Ti3AlC2 contents

Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy

Influence of micron and nano SiC<sub>p</sub> on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy