Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Effect of preset interfacial ZrB 2 particles on the microstructure and properties of C/C-AlSi composites

Effect of Preset Interfacial ZrB2 Particles on the Microstructure and Properties of C/C-AlSi Composites

Effect of Alloying Elements on Mechanical Properties of the SiC/Al Biconnected Composites

Effect of Infiltrated Eutectic AlSi on the Microstructure and Properties of C/C Composites

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Microstructure and Properties of Hot Pressed Zr2(Al(Si))4C5/SiC Composites

Preparation and Mechanical Properties of C/C-ZrC Composites

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Effects of Zr element on the microstructure and mechanical properties of B4C/Al composites fabricated by melt stirring method

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

Influence of ZrC Content on Mechanical Properties of C/C- ZrC Composites

Influence Mechanisms of Zr and Fe Particle Additions on the Microstructure and Mechanical Behavior of Squeeze-Cast 7075al Hybrid Composites

Interfacial Modification and Performance Enhancement of Carbon Matrix/aluminum Composites

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Microstructure and Mechanical Properties of Three Dimensional Cf/SiC-ZrC-ZrB2 Composites Prepared by Reactive Melt Infiltration Method

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Effect of Ti 3 AlC 2 Content on Mechanical Properties of Ti 3 AlC 2 /ZA27 Composites

Investigation of the Evolution and Strengthening Effect of Aluminum Carbide for In-Situ Preparation of Carbon Nanosheets/aluminum Composites

Effect of ZrC Content on the Properties of Biomorphic C–ZrC–SiC Composites Prepared Using Hybrid Precursors of Novel Organometallic Zirconium Polymer and Polycarbosilane

In Situ Preparation and Mechanical Properties of (ZrB2+ZrC)/Zr3[Al(Si)]4C6 Composites