Abstract:AlN-SiC multiphase ceramics possess robust mechanical strength, high thermal conductivity and good oxidization resistance, and show great potential as the matrix material of fiber reinforced ceramic matrix composites. In this work, AlN-SiC multiphase ceramics were fabricated via low temperature reactive melt infiltration of Si-Al alloy into porous C-Si3N4 preforms. Influence of Si-Al source on the melt infiltration process was studied, and impact of residual silicon on the mechanical and thermal properties of the AlN-SiC ceramics was investigated. It was found that an Al-O layer was in- situ formed at the interface between Si-Al melt and C-Si3N4 preform, when Si-Al powder was used as the infiltration medium. This seriously retarded the melt infiltration process and made the penetration of Si- Al melt into the C-Si3N4 preform hardly possible. However, when Si-Al ingot was used as the infiltration medium, a well infiltration of Si-Al melt into the C-Si3N4 preform occurred, which led to the formation of dense AlN-SiC ceramics. Mechanical and thermal property measurements indicated that the strength of the AlN-SiC ceramics was significantly improved as the residual silicon content in it was reduced, while a reverse trend was observed for the thermal conductivity. AlN-SiC ceramics with 4%( in mass) residual silicon showed a high strength of 320.1 MPa, nearly comparable to that of conventional reaction bonded SiC, although its thermal conductivity was modest (26.3 W center dot m(-1)center dot K-1). The fundamental reasons for the above phenomena were discussed. This study is of great significance for the preparation of SiCf/AlN-SiC composites by low temperature reactive melt infiltration.

The Microstructure and Properties of SiC/SiC-based Composites Fabricated by Low-Temperature Melt Infiltration of Al–Si Alloy

Microstructure and properties of C/C–SiC composites prepared by reactive melt infiltration at low temperature in vacuum

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Fabrication of SiCf/SiC Composites by Chemical Vapor Infiltration and Vapor Silicon Infiltration

Improvement of the Mechanical and Thermophysical Properties of C/SiC Composites Fabricated by Liquid Silicon Infiltration

Microstructure and form processing of C/C-SiC-Cu5Si composites

Microstructure and Mechanical Properties of Fe–Si Alloy Modified C/C–SiC Composites

Microstructure and Properties of Particle Reinforced Silicon Carbide and Silicon Nitride Ceramic Matrix Composites Prepared by Chemical Vapor Infiltration

Microstructure Evolution and Mechanical Properties of C/C-SiC Composites Prepared with Different Prefabricated Structures

Microstructure and Oxidation Resistance of Carbon/silicon Carbide Composites Infiltrated with Chromium Silicide

Fabrication and Properties of AlN-SiC Multiphase Ceramics <i>via</i> Low Temperature Reactive Melt Infiltration

Fabrication of Ti 3SiC 2 modified C/C-SiC composites by liquid silicon infiltration

Pressureless Infiltration Preparation of High SiC/Al Ceramic Matrix Composites

Microstructure and properties of plain-weave carbon fabric reinforced ceramic composites containing Cu-Si alloy

Ti3si(Al)C-2-Based Ceramics Fabricated by Reactive Melt Infiltration with Al70si30 Alloy

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

Microstructure, Interfacial and Mechanical Properties of SiC Interphase Modified C/C-SiC Composites Prepared by Reactive Melt Infiltration

The Microstructure and Mechanical Property of Mo(Si, Al)2-SiC Composite Prepared by Infiltrating Melt Aluminum

Microstructures and mechanical properties of Ti3(Al,Si)C2/Al2O3 composites fabricated by current-assisted sintering of Ti3AlC2/SiO and Ti3AlC2/SiO2