Abstract:In this paper, 3D-SiC network skeleton with different structures was successfully constructed by regulating the microstructure of SiC foam ceramic struts via polyurethane replication technology combined with reactive infiltration of Si and solid-state sintering. Then, SiC/Al composites with 3D-interpenetrated network structure (3D-SiC/Al) were fabricated via vacuum pressure infiltration of Al alloy into the 3D-SiC skeleton, for application as electronic packaging. The effects of different skeleton structures on the thermal conductivity (TC), coefficient of thermal expansion (CTE), and flexural strength of the composites were investigated in detail. Furthermore, representative volume element (RVE) models of the 3D-SiC/Al composites were developed and their heat transfer properties and dimensional stability were also comparatively analyzed by finite element (FE) simulations. The results showed that the 3D-SiC/Al composites exhibited high TC of 196 W/m·K, low CTE of 8.03 × 10−6 K−1, and excellent flexural strength of 272 MPa. Low thermal deformation parameter (TDP) and Ashby map demonstrated that the synergistic effect of a complete 3D network skeleton and a clean well-bonded interface in the 3D-SiC/Al composites facilitated the integration of low CTE and high TC even at a low SiC content of 30 vol%. The FE results revealed a 63.5 % reduction in thermal stress and nearly an order of magnitude increase in heat flux for the RVE model of 3D-SiC (30 vol%)/Al composite compared to the RVE model of SiCP (60 vol%)/Al composite. This work provides a novel and scalable method for designing and synthesizing various composites for electronic packaging.

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

Effects of SiC contents on the microstructure and mechanical properties of Al4SiC4–SiC ceramic composites

Tailoring the thermophysical properties of porous SiC framework reinforced Al-Mg-Si composites by Si alloying content for thermal energy management

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Mechanical and thermal expansion behavior of hybrid aluminum matrix composites reinforced with SiC particles and short carbon fibers

EFFECTS OF FABRIC ARCHITECTURES ON THE THERMAL EXPANSION COEFFICIENT AND THE THERMAL DIFFUSIVITY OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

Effect of preform structure on mechanical and thermal properties of SiCf/SiC composites

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

EFFECTS OF HEAT TREATMENT ON THERMAL EXPANSION OF 3D C/SiC COMPOSITES

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites

Effects of chopped carbon fiber on the forming, structure and mechanical properties of CCF/SiC composites fabricated by SLS and RMI

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

The Thermal Expansion Behaviour of SiCp/Al–20Si Composites Solidified under High Pressures

Reinforcement of thermally-conductive SiC/Al composite with 3D-interpenetrated network structure by various SiC foam ceramic skeletons

Preparation and Properties of C/SiC Composites Reinforced by High Thermal Conductivity Graphite Films

Effects of interphases on thermal expansion of 3D-C/SIC composites

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler