Abstract:The near-net-shape characteristics of Additive Manufacturing offer significant advantages in fabricating SiCp/Al composite components. However, the high-temperature melt pool during the deposition process promotes an interface reaction between SiC and Al, forming Al4C3. Al 4 C 3 shortens the service life of SiC p /Al composite structural components, so it is critical to avoid its formation when preparing SiC p /Al composites via laser-directed energy deposition. This study prepared SiC p /Al composite components through coincident wire powder laser-directed energy deposition with Ti alloying, effectively preventing the formation of Al4C3 in AMC. Furthermore, it investigated the effect of Ti atoms on the microstructural evolution and strengthening mechanism. The results showed that the formation of large flake-like Al 4 C 3 was avoided without generating excess Al 3 Ti only when using an appropriate amount of Ti (Ti: SiC = 3: 10). After introducing Ti, Ti atoms in the melt pool migrated towards the SiC surface and reacted with C atoms (from the dissolution of SiC) and formed TiC. The resulting TiC enclosed the SiC particles in a thin film, preventing the further dissolution of SiC and inhibiting the generation of Al4C3. Additionally, some TiC nanoparticles dispersed within the matrix, serving as heterogeneous nucleation sites for Al, reducing the average equivalent circular grain radius from 38.10 μm to 7.20 μm. After Ti alloying, the average modulus and yield strength of AMC both increased. This increase was attributed to the load transfer energy of SiC particles, grain refinement of the matrix, and the dispersion-strengthening effect of TiC nanoparticles. An intrinsic relationship between the SiC-Al-Ti interfacial reaction and the mechanical properties of SiCp/Al composites has been established to provide theoretical guidance for eliminating Al4C3 phases in SiCp/Al composites prepared by laser-directed energy deposition, ensuring performance comparable to traditionally fabricated products.

Effects of Ti/Al addition on the microstructures and ablation properties of C f /C–MoSi 2 –SiC composites

Effect of Cu addition on the microstructure, thermal physical properties and cyclic ablation of C/C-AlSi composite

Investigation of Ti alloying for microstructural evolution and strengthening mechanism: Avoiding Al 4 C 3 formation in SiC p /Al composites via laser directed energy deposition

Effect of mullite content on microstructure and ablation behavior of mullite modified C/C-SiC-HfC composites

Effects of Ti3SiC2 on microstructure and properties of TiC0.4 enhanced TiAl matrix composites

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

Microstructure and ablation behavior of C/C–HfC–SiC composites fabricated by reactive melt infiltration with Hf–Si alloy

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Effect of Ti Doping on the Microstructure and Properties of SiCp/Al Composites by Pressureless Infiltration

Ablation resistance of SiC-modified nanocomposite ceramic coating prepared by LPDS method on titanium alloy

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

Ultra-high-temperature ablation behavior of SiC–ZrC–TiC modified carbon/carbon composites fabricated via reactive melt infiltration

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Cyclic ablation behaviors of mullite‐modified C/C–ZrC–SiC composites prepared by PIP

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Cyclic ablation behavior of mullite-modified C/C-HfC-SiC composites under an oxyacetylene flame at about 2400 °C

Ablation resistance of C/C-SiCo nanoporous ceramic composites with TaSi2-MoSi2-ZrB2-borosilicate glass coating

Microstructural and high-temperature performance evolution of Al-doped lamellar porous Ti 3 SiC 2 using freeze casting

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Effect of Mo addition on microstructure and wear resistance of laser clad AlCoCrFeNi-TiC composite coatings